Daily Moisturizer (with SPF)
No. 3011
This formulation features Cola®Fax CPE, Poly Suga®Mulse D6, and Cola®Moist 200 for a broad spectrum, mineral-based SPF 15*. This non-whitening lotion is silky and dry to the touch. Light enough for daily use.
*Estimated SPF
Formulation
Order | INCI Name | Trade Name | Percent | Function |
A | Water | Water | qs to 100.00 | |
A | Xanthan Gum | Keltrol® CG LAX-T ¹ | 0.60 | |
A | Cetyl Phosphate | Cola®Fax CPE | 1.00 | |
A | Potassium Hydroxide | Potassium Hydroxide, 45% | 0.60 | |
A | Sorbitan Oleate Decylglucoside Crosspolymer | Poly Suga®Mulse D6 | 4.00 | |
A | Hydroxypropyl Bis-Hydroxyethyldimonium Chloride | Cola®Moist 200 | 2.00 | |
B | Zinc Oxide and Titanium dioxide and Caprylic/capric triglyceride and Polyhydroxystearic acid and Alumina and Stearic acid | Xperse® 301 ² | 15.00 | |
B | Cetyl Alcohol | Lanette® 16 ³ | 4.00 | |
B | Isopropyl Myristate | Isopropyl Myristate ³ | 5.00 | |
B | Coco-Caprylate | Cetiol® C5 ³ | 3.00 | |
B | Myristyl Myristate | Cetiol® MM ³ | 2.00 | |
C | Phenoxyethanol and Ethylhexylglycerin | Euxyl® PE 9010 ⁴ | 0.50 | |
C | Fragrance | WS Calming Fragrance ⁵ | 0.20 |
Procedure
- Disperse xanthan gum in water with moderate mixing. Mix until completely hydrated.
- Heat to 65 – 70°C and add remaining phase A ingredients.
- In a separate vessel, combine phase B ingredients and heat to 60 – 65°C.
- Once both phases are at temperature, slowly add phase B to phase A.
- Homogenize and cool to 45°C.
- Add remaining ingredients.
Properties
Appearance: Opaque Cream
pH: 6.0 – 7.0
Viscosity (T-E, 6rpm): 45,000 cP
Active Ingredients
Zinc Oxide 4.50%
Titanium Dioxide 3.45%
Suppliers
1CP Kelco, 2EverZinc, 3BASF, 4Schülke & Mayr, 5Orchidia
This formulation is intended for use as a generic starting formula and may be modified as needed. This formulation is for developmental use only. Not intended for resale.