In-Shower Body Lotion
No. 3010
This formulation features Cola®Fax CPE, Cola®Lipid ST, and Cola®Moist 200 for instant moisturization in the shower with no sticky or tacky feel. Just apply on wet skin, rinse off, and pat dry, this formulation will leave your skin soft and smooth.
Formulation
| Order | INCI Name | Trade Name | Percent | Function |
| A | Water | Water | qs to 100.00 | |
| A | Hydroxypropyl Starch Phosphate | Structure® XL 1 | 2.00 | |
| A | Cetyl Phosphate | Cola®Fax CPE | 1.00 | |
| A | Potassium Hydroxide | Potassium Hydroxide, 45% | 0.60 | |
| A | Hydroxypropyl Bis-Hydroxyethyldimonium Chloride | Cola®Moist 200 | 3.00 | |
| B | Stearamidopropyl PG-Dimonium Chloride Phosphate | Cola®Lipid ST | 2.00 | |
| B | Butyrospermum Parkii (Shea) Butter | Biochemica® Shea Butter Refined 2 | 5.00 | |
| B | Cocos Nucifera (Coconut) Oil | Coconut Oil | 5.00 | |
| B | Coco-Caprylate | Cetiol® C5 3 | 2.00 | |
| B | Cetearyl Alcohol | Lanette® O 3 | 2.00 | |
| C | Phenoxyethanol and Ethylhexylglycerin | Euxyl® PE 9010 4 | 0.50 | |
| C | Fragrance | Vanilla Fragrance 5 | 0.10 |
Procedure
- In primary vessel, disperse Structure® XL in water and heat to 60 – 65°C.
- Once at temperature, add Cola®Fax CPE and Potassium Hydroxide and mix until completely dissolved.
- Add remaining phase A ingredients. Mix until completely homogeneous.
- In a separate vessel, combine phase B ingredients and heat to 60 – 65°C.
- Once both phases are at temperature, slowly add Phase B to Phase A.
- Homogenize and cool to 45°C.
- Add remaining Phase C ingredients.
Properties
Appearance: Opaque Cream
pH: 6.0 – 6.5
Viscosity (T-E, 6 rpm): 60,000 cP
Suppliers
1AkzoNobel, 2Hallstar, 3BASF, 4Schülke & Mayr, 5Orchidia Fragrances
This formulation is intended for use as a generic starting formula and may be modified as needed. This formulation is for developmental use only. Not intended for resale.