Low-Oil, Semi-Synthetic Metalworking Fluid
No. 9001
- Baseline Formulation
- No anti-foaming agents were used
- Suggested dilution: 5%
- Milk-like fluid
- pH = 9 for the work fluid
- Suitable for
- Low- to medium- duty machining process
- The ferrous machining process
- Applicable to general milling & drilling processes
- Further Performance Enhancements
- Using Cola®Lube 3407 to enhance the EP wear protection for heavy-duty machining process or forming process
- Using Cola®Cor KAT or Cola®Cor 215 for aluminum staining inhibition
Formulation
| Order | INCI Name | Trade Name | Percent | Function |
| 1 | 100 SUS naphthenic oil | 20.0 | ||
| 2 | Cola®Lube 3449 | 5.0 | ||
| 3 | High rosin tall oil fatty acids | 2.0 | ||
| 4 | Cola®Lube 3440 | 3.0 | ||
| 5 | Cola®Lube 3430 | 4.0 | ||
| 6 | Cola®Dol 91-6 | 2.0 | ||
| 7 | Cola®Carb M7C | 2.0 | ||
| 8 | Fungicide | 1.0 | ||
| 9 | Triethanolamine (99%) | 3.5 | ||
| 10 | Cola®Cor 300 | 4.0 | ||
| 11 | Cola®Cor 232 | 6.0 | ||
| 12 | Cola®Cor RP | 5.0 | ||
| 13 | Corrguard® EXT | 0.75 | ||
| 14 | Deionized water | 39.75 | ||
| 15 | Bactericide | 2.0 |
Related Documents
Related Products
This formulation is intended for use as a generic starting formula and may be modified as needed. This formulation is for developmental use only. Not intended for resale.