Products

Use the filters below to help narrow down your search for a specific product. If you have any questions, please contact us.

Clear Filters

Filter By

Sort By

Clear Filters

Filter By

Sort By

Cola®Cap MA139

End-capped nonionic surfactant

Cola®Cap MA139 is a 100% active, low-foaming surfactant that provides excellent product color and chemical stability over a wide pH range. Cola®Cap MA139 offers optimization of detergency, wetting and food soil defoaming characteristics.

Cola®Cap MA139 incorporates a capping group that provides unique functionality, greater biodegradability and does not interfere with wetting, detergency or surface activity. It is also structurally sufficient to provide good food soil defoaming properties. Cola®Cap MA139 develops low foaming properties without the use of propylene oxide capping that potentially could inhibit biodegradation.

Learn more →

Cola®Cap MA259

End-capped nonionic surfactant

Cola®Cap MA259 is a 100% active, low-foaming surfactant that provides excellent product color and chemical stability over a wide pH range. Cola®Cap MA259 offers optimization of detergency, wetting and food soil defoaming characteristics.
Cola®Cap MA259 incorporates a capping group that provides unique functionality, greater biodegradability and does not interfere with wetting, detergency or surface activity. It is also structurally suffi cient to provide good food soil defoaming properties. Cola®Cap MA259 develops low foaming properties without the use of propylene oxide capping that potentially could inhibit biodegradation.

Learn more →

Cola®Carb BEA

Sodium Butoxyethoxy Acetate

Cola®Carb BEA is an extremely low foaming wetting agent, stable to high acid and alkali. It is soluble in 20% HCl and 20% KOH.

Learn more →

Cola®Carb O2C

Low Foaming Emulsifier with Corrosion Protection Properties

Cola®Carb O2C is a low-foaming ether carboxylic acid with excellent emulsification and corrosion inhibition properties and used for metalworking fluids, fire resistant hydraulic fluids and rolling emulsions. Cola®Carb O2C is stable against electrolyte and hard water and shows good corrosion protection upon neutralization with alkanolamines. As a multi-functional additive, Cola®Carb O2C helps to decrease complexity of formulation and suitable for long life fluids.

Learn more →

Cola®Carb TDC

Moderate Foaming Wetting Agent

Cola®Carb TDC is a mild anionic surfactant with hard water tolerance. It improves the storage stability of amphoteric formulations and useful in combination with all ionic classes of surfactants. Cola®Carb TDC has applications in personal care and industrial formulations.

Learn more →

Cola®Cor 100

Water-soluble corrosion inihbitor for acid or alkaline conditions

Cola®Cor 100 is a water-soluble amphoteric corrosion inhibitor designed for use in various metalworking, detergent and aerosol applications. Aqueous solutions provide effective corrosion protection at typical use concentrations (0.1 to 1.0%). ColaCor 100 has been used to provide rust inhibition properties in acidic and alkaline conditions. ColaCor 100 exhibits excellent tolerance for water hardness and contributes detergency in aqueous systems.

Learn more →

Cola®Cor 186

Isononanoylamidocaproic Acid

Cola®Cor 186 is a low-foaming, excellent corrosion inhibitor useful in rolling emulsions, rolling oils and water-based hydraulic fluids. Cola®Cor 186 comes in a solid and acid form, offering the formulator many neutralization options. Cola®Cor 186 is compatible with phosphoric acid esters in neutralized form, and extreme-pressure properties of semi- and full synthetic formulations based on Cola®Cor 186 can be adjusted.

Water-soluble salts of Cola®Cor 186 are obtained by neutralization with alkanolamines and aqueous alkali hydroxides. They may be used alone or in combination with other water soluble corrosion inhibitors or lubricants in grinding and cutting fluids and other aqueous hydraulic systems.

Learn more →

Cola®Cor 200

Water-soluble corrosion inhibitor

Cola®Cor 200 is a water-soluble amine carboxylate that is useful in a variety of metalworking, detergent, aerosol, and water-based coating applications. Aqueous solutions are low foaming, providing effective corrosion protection and surface activity in use treat levels (0.5 – 1.5%). For optimum rust protection, solution pH should be adjusted to 8.5 or greater with triethanolamine. Cola®Cor 200 exhibits excellent tolerance to water hardness and aqueous films dry to tack free residues. Environmentally safe; does not contain boron, phosphates, chromates, nitrites or metallic cations.

Learn more →

Cola®Cor 215

Amine Carboxylate Blend

Corrosion Inhibitor

 

Cola®Cor 215 is a unique amine carboxylate blend developed for aluminum and ferrous metals. It is water soluble and suitable for synthetic, semi-synthetic and soluble oil metalworking formulations such as machining coolants, threading, tapping, cutting, and grinding fluids. It may also be used as a short-term indoor corrosion inhibitor.

Cola®Cor 215 leaves a thin, non-tacky film that can be easily removed with H₂O. It is effective on both steel and aluminum and is hard water stable at 300 – 400 ppm.

Cola®Cor 215 contains no phosphorous or DEA.

Learn more →

Cola®Cor 298

Carboxylic Acid Amine Mixture

Cola®Cor 298 is a low-foaming, optimized blend of amine carboxylates primarily developed for ferrous metals. It is water soluble and suitable for synthetic, semi-synthetic and soluble oil metalworking formulations such as machining coolants, threading, tapping, cutting, and grinding fluids.

Cola®Cor 298 is primarily used for ferrous metals, but not aggressive to non-ferrous. It provides excellent protection from flash rusting and is hard water stable at over 500 ppm.

Cola®Cor 298 contains no phosphorous or DEA.

Learn more →

Cola®Cor 300

Water-soluble corrosion inhibitor

Cola®Cor 300 is a water-soluble amine carboxylate corrosion inhibitor designed for metalworking, detergent and aerosol applications. Aqueous solutions are very low foaming and provide effective corrosion protection at typical in use treat levels (0.5 – 1.0%). For optimum rust protection, solution pH should be adjusted to 8.5 or greater. Cola®Cor 300 exhibits excellent tolerance to water hardness and aqueous films dry to tack free residues. Environmentally safe; does not contain boron, phosphates, chromates, nitrites or metallic cations.

Learn more →

Cola®Cor 372

Amine Neutralized Acyl Amido Carboxylic Acid

Cola®Cor 372 is used as a low-foaming corrosion inhibitor in metalworking fluids, in rolling emulsions and water-based hydraulic fluids. Cola®Cor 372 is insoluble in water. Water soluble salts of Cola®Cor 372 are obtained by neutralization with alkanolamines and hydroxides and useful alone or combined with other water soluble corrosion inhibitors or lubricants. Alkanolamines salts derived from Cola®Cor 372 show excellent corrosion inhibition for steel and hard water stability.

Learn more →

Cola®Cor 400

Water-soluble, low foam corrosion inhibitor for non ferrous

Cola®Cor 400 is a water-soluble amine carboxylate corrosion inhibitor designed for use in various metalworking, detergent and aerosol applications. Aqueous solutions are very low foaming and will provide effective corrosion protection at recommended use concentrations. The performance properties of Cola®Cor 400 are not affected by water hardness, and aqueous films dry down to non-tacky residues. Cola®Cor 400 demonstrates more potent corrosion inhibiting properties than traditionally used carboxylic types. Cola®Cor 400 is currently being used successfully in low foam, alkaline spray washes for rust protection, as well as, for improved wetting/rinsibility at 0.1% – 0.3% active.

Learn more →

Cola®Cor 500

Water-soluble corrision inhibitor

Cola®Cor 500 is a water soluble, synthetic amine carboxylate corrosion inhibitor. Cola®Cor 500 is a highly effective, low cost preventative for cast iron, steel alloys. Cola®Cor 500 provides corrosion protection on ferrous surfaces in solution where the pH is approximately 8.0 or higher. Cola®Cor 500 is non-foaming and has good stability in hard water.

Cola®Cor 500 is useful where temporary protection against flash rusting is needed. When water is allowed to evaporate, a thin liquid film remains that provides rust protection to ferrous surfaces, even under high humidity conditions. The Cola®Cor 500 can easily be removed by rinsing with water. It also burns off cleanly in annealing or other high temperature processing operations.

Cola®Cor 500 is composed of a mixture of organic acid salts, but is not based on PTBBA, nitrites or borates. It is also diethanolamine free.

Learn more →

Cola®Cor 635

DEA-free Fatty Acid DIPA Alkanolamide

Cola®Cor 635 is a DEA-free fatty acid alkanolamide that can be used as a corrosion inhibitor, lubricant, and secondary emulsifier for aqueous metalworking fluids. Cola®Cor 635 can be substituted for typical DEA-containing products used in synthetic and semi-synthetic systems. At use levels of 3-20%, Cola®Cor 635 offers superior corrosion protection and lubrication properties and can be combined with other anionic surfactants to create low-foaming systems. For emulsifiable oils, Cola®Cor 635 can be used to increase emulsion stability, corrosion protection, hard water stability, and storage life.

Learn more →

Cola®Cor 700

Vapor phase corrosion inhibitor

Cola®Cor 700 is a non-foaming, water-soluble corrosion inhibitor for liquid and vapor phase protecting. It will work on cast iron, steel, and non-ferrous metals such as aluminum and copper. It is recommended as a replacement for sodium nitrite in a variety of applications where protection of the liquid phase and vapor phase is needed. Cola®Cor 700 has proven to be an ideal and effective corrosion inhibitor for aerosol formulations containing water.

Learn more →

Cola®Cor ACI

Water-soluble, aluminum corrosion inhibitor

Cola®Cor ACI is an aluminum corrosion inhibitor and designed to prevent corrosion for aluminum and ferrous metals. It is a water-soluble product in its free acid form and the potassium, sodium and amine salts are completely soluble in water.

Learn more →

Cola®Cor C-56

Imidazoline Benzyl Chloride Quat (Alkylbenzylimidazolium Chloride)

Cola®Cor C-56 is a concentrate water-soluble cationic corrosion inhibitor for continuous treatment in oil and gas production. Cola®Cor C-56 is soluble in light brines and dispersible in very heavy brines. Cola®Cor C-56 is useful in corrosion inhibitors designed for pumps, headers, separators, emulsion treaters, tanks, regulators, compressors, dehydrators, valves and associated equipment. For use in the field, Cola®Cor C-56 is normally diluted to 25-35% and applied at levels of 10-50 PPM.

As a clay stabilizing agent, Cola®Cor C-56 is useful during enhanced oil recovery in acidizing, fracturing and sand control applications.

Learn more →

Cola®Cor CI-24

DEA-free, water-soluble corrosion inhibitor

Cola®Cor CI-24 is a water-soluble, highly effective corrosion compound for use as corrosion inhibitor in aqueous systems. Cola®Cor CI-24 is diethanolamine free, yet provides a high amount of reserve alkalinity for good corrosion protection.

Learn more →

Cola®Cor CIC

Modified Imidazoline

Cola®Cor CIC is a unique, modified imidazoline that provides outstanding corrosion inhibition properties at low concentrations in greases and
oil-based lubricants. Cola®Cor CIC markedly improves the water resistance of greases, while having no detrimental effects on other grease properties.

SOLUBILITIES
Cola®Cor CIC provides excellent corrosion inhibition and functions as an emulsion stabilizer in soluble oil formulations.

Solubilities @ 10% Concentration:
Water – Insoluble
Alcohol – Soluble
Mineral Oil – Soluble
Mineral Spirits – Soluble
Natural Oil & Fats – Soluble

Learn more →

Cola®Cor EDP

Vapor phase corrosion inhibitor and lubricant

Cola®Cor EDP is a corrosion inhibitor for use in metalworking fluids. Cola®Cor EDP provides corrosion protection for ferrous and non-ferrous metals in the liquid and vapor phase. Cola®Cor EDP provides corrosion protection and phosphorous for lubrication in metalworking fluids.

Cola®Cor EDP has also show utility in un-reactive type fire retardant additives for polymers and plastics. In addition, Cola®Cor EDP has been used to slow cement curing.

Learn more →

Cola®Cor IT

Water-Soluble Multi-Metal Low Foam Corrosion Inhibitor

Cola®Cor IT is a low-foaming, excellent corrosion inhibitor useful in metalworking fluids, rolling emulsions, water-based hydraulic fluids, and metal cleaners. It is clearly soluble in glycols, water and alkanolamines, but insoluble in hydrocarbons. Cola®Cor IT demonstrates good hard water stability and normal applications do not require an additional defoamer. Cola®Cor IT may be used alone or in combination with other water soluble corrosion inhibitors or lubricants in grinding and cutting fluids and other aqueous hydraulic systems.

Learn more →

Cola®Cor RP

Corrision Inhibitor for ferrous and non-ferrous

Cola®Cor RP is a non-foaming, water-soluble corrosion inhibitor for cast iron, steel, and non-ferrous metals such as aluminum and copper. It is recommended as a replacement for sodium nitrite especially in cutting and grinding fluids. Cola®Cor RP has proven to be an extremely effective corrosion inhibitor for aerosol formulations containing water.

Learn more →

Cola®Cor THE

Corrosion Inhibitor with anti-wear properties; boundary lubrication

Cola®Cor THE is an ashless, oil soluble corrosion inhibitor that provides long lasting rust protection as well as anti-wear properties and effective boundary lubrication. Cola®Cor THE is ideal for use in rust preventatives for industrial and steel mill applications, hydraulic oils, drawing compounds, rolling oils, and other industrial lubricants.

Learn more →

Cola®Cor V

Corrosion Inhibitor for grease applications

Cola®Cor V is an oil soluble corrosion inhibitor and has been specifically designed to provide excellent rust inhibition for greases. Cola®Cor V is soluble in petroleum lubricant bases and is insoluble in water.

Learn more →

Cola®Det 100

All Purpose Detergent Concentrate

Cola®Det 100 is a biodegradable detergent concentrate made from linear alkylbenzene sulfonate, coconut diethanolamide, and mixed ethoxylated alcohols. These ingredients are blended in the proper ratio to provide maximum cleaning efficiency and excellent physical properties.

Cola®Det 100 has a high active content, low clear and solidification points. It requires minimum warehousing space because of its high activity level, and permits storage at low temperatures, allowing easy production of highly effective detergent products. The efficiency and synergism of alkylbenzene sulfonate/alkanolamide/ ethoxylated nonionic detergent systems is well known by most formulators and this type of product can be used in a multitude of cleaning applications.

Learn more →

Cola®Det 190

All Purpose Detergent Concentrate

Cola®Det 190 is a highly concentrated, proprietary blend of anionic and nonionic surfactants that can be used as a base for a wide range of dishwash, laundry and other household cleaning products, covering the range from economy to premium formulations.

Cola®Det 190 can be used in varying amounts to meet the performance and appearance requirements of a wide range of dishwash and laundry products. Formulations based on Cola®Det 190 are mild to the hands, give long-lasting flash foam and have excellent cleaning
power. Cola®Det 190 is useful in making high solids products because of its superior solubility
and tolerance to electrolytes and builders.

Cola®Det 190 is biodegradable. Detailed biodegradability information is available upon request from each of the components in the blend.

Learn more →

Cola®Det 4X Ultra Conc

Concentrated Natural Liquid Laundry Detergent

Colonial Chemical’s natural liquid laundry detergent formulation is free of ethoxylates (1,4-dioxane), alcohols, diethanolamides, lauryl sulfates, laureth sulfates, parabens, and formaldehyde. It is prepared with Suga®Nate 160NC, Colonial’s 100% natural APG-based surfactant that offers powerful cleaning and unparalleled mildness. The remaining ingredients in the formulation are easily obtainable and derived from natural, renewable resources.

The super concentrated formulation offers a natural, convenient and powerful stain fighting system that can be used as listed or easily modified. 4X Ultra Concentrated Natural Liquid Laundry Detergent is highly concentrated and designed to produce the best results when measured and used accordingly:

Medium or Small Loads: 3/4 oz. Large or Heavily Soiled Loads: 1 oz.
For tough stains, pretreat by pouring liquid laundry detergent directly onto fabric.
Rub gently into fabric and soak for five minutes.

SPECIAL NOTE:
The finished formulation or variations of the formula are also available in bulk supply for packaging. Please contact Customer Service for complete pricing and delivery options.

Learn more →

Cola®Det BSC-ND

DEA-Free Mild Pet Shampoo Concentrate

Cola®Det BSC-ND is a DEA-free, anionic and amphoteric concentrated blend of mild surfactants. With only dilution and minor additives, Cola®Det BSC-ND can be economically formulated into marketable pet products that provide mildness while off ering foam and viscosity equal or greater than leading brand pet shampoos.

All materials that compose Cola®Det BSC-ND are Registered EPA Inert Ingredients. Using Cola®Det BSC-ND, formulations for disinfectanting, sanitizing, and flea and tick products for pets are already adopting the necessary ingredients to meet EPA approval in the finished product.

Cola®Det BSC-ND has low irritation properties making it ideal for mild cleansing products and can also be used in baby, children and adult products for sensitive skin.

Learn more →

Cola®Det COCO

97% Naturally Derived Surfactant Blend

Cola®Det COCO is a highly concentrated, green, mild surfactant blend with each surfactant being derived from vegetable sources. Cola®Det COCO exhibits low irritation and builds high, thick, creamy foam.

Formulations that include Cola®Det COCO leave a soft, lubricious feel on hair and skin after rinsing. For personal care products, this surfactant blend foams extremely well, easily builds viscosity and contains only “coco” surfactants.

Cola®Det COCO is useful in the formulation of A wide variety of personal care and household products. Strong and rapid viscosity response is present with sodium chloride for the development of very viscous end use products, even at low concentration levels.

  • Cola®Det COCO is “Derived Natural” with a Natural Origin Index of 0.97 in accordance with ISO 16128 guideline.

Learn more →

Cola®Det DEF-15

SLES, DEA-Free Surfactant Concentrate

Cola®Det DEF-15 is an anionic/nonionic/amphoteric blend sodium salt. Colonial Chemical’s Cola®Det DEF surfactant concentrates are produced completely DEA/MEA free which generate high viscosity at low solids and produce products that can be built over a wide viscosity range. Elegant and complete products can be easily created that are DEA free with simple addition of perfume, color and other minor ingredients. Cola®Det DEF-15 is designed to give the formulator an easy starting point for the creation of personal care products with luxuriant foam and good rinsing.

Learn more →

Cola®Det DEF-20

ALES, DEA-Free Surfactant Concentrate

Cola®Det DEF-20 is an anionic/nonionic/amphoteric blend sodium salt. Colonial Chemical’s Cola®Det DEF surfactant concentrates are produced completely DEA/MEA free which generate high viscosity at low solids and produce products that can be built over a wide viscosity range. Elegant and complete products can be easily created that are DEA free with simple addition of perfume, color and other minor ingredients. Cola®Det DEF-20 is designed for personal care formulations that are pH 5.5 to 7.0 and an easy starting point for the creation of many products.

Learn more →

Cola®Det DEF-26

SLS, Betaine-Free, DEA-Free Surfactant Concentrate

Cola®DEF-26 is a betaine-free anionic/nonionic/amphoteric surfactant blend. This DEA and MEA-free synergistic blend of surfactants is a high active surfactant base specially developed for use in the preparation of hair shampoos and skin cleanser systems. Cola®DEF-26 is an easy-to-use blend that readily yields high-foaming, completely formulated products with simple water dilution. Viscosity of the final formulation can then easily be adjusted with precise electrolyte additions.
Upon dilution, Cola®Det DEF-26 can be used in a variety of applications such as shampoos and bath products with a suggested usage of 10% to 40%.

Learn more →

Cola®Det DEF-35

DEA-Free Liquid Cold-Mix Pearl Concentrate

Cola®Det DEF-35 is a high-active liquid pearling agent designed for easy dispersibility at ambient temperatures. Cola®Det DEF-35 is used in pearlescent cosmetic surfactant preparations, particularly for DEA free formulations, and forms an elegant pearl in all liquid personal care formulations. It is added slowly to the batch with moderate agitation to obtain attractive pearlescence and stability. The amount of use will vary from 3% to 12% based on the pearl effect desired. Cola®Det DEF-35 is useful in many personal care applications.

Learn more →

Cola®Det DEF-40

DEA-Free Waterless Hand Cleaner Concentrate

Cola®Det DEF-40 is a DEA and MEA-free surfactant that provides an effective, easy-to-use emulsifier for use in lotion-type or “ringing gel” waterless hand cleaners.

Cola®Det DEF-40 provides formulation flexibility in allowing for slow or fast-set systems without heat or special equipment.

Cola®Det DEF-40 improves the cleaning, rinsing, and rubs out “break” properties of waterless hand cleaner formulations based on odorless mineral spirits, deodorized kerosene and d-Limonene.

Learn more →

Cola®Det DEF-45

DEA-Free Citrus Oil Emulsifier

Cola®Det DEF-45 is a DEA-free citrus oil emulsifier designed to yield micro-emulsions of non-polar solvents. A wide range of hard surface cleaners, waterless hand cleaners, and degreasers can be formulated with this product. It is most effective in blends containing d-limonene, terpenes, naphthenic pine oils and Exxate type solvents. Appropriate blends of these oils can produce highly synergistic cleaners.

Learn more →

Cola®Det KC-40

Potassium Cocoate Soap

Cola®Det KC-40 is a premium quality potassium cocoate soap that exhibits excellent flash foam, excellent color and low odor. Cola®Det KC-40 is biodegradable, made from natural and renewable resources, and preservative-free – making it ideal for natural formulations, including high lathering soaps and cost-effective cleansers

Cola®Det KC-40 is “Derived Natural” with a Natural Origin Index of 1.0 in accordance with ISO 16128 guideline.

ALSO AVAILABLE
USDA Certified Organic Cola®Det OKC-40 is ideal for formulators seeking organic certification who plan to label their products as “Made with Organic…” and be in certified compliance with the National Organic Program (7CFR Part 205).

Learn more →

Cola®Det L116N

APG-Based Hand Soap Concentrate

Cola®Det L116N is a mild, non-alkanolamide, high foaming concentrate. It displays multifunctional properties including good detergency and high foaming even at low active levels. Cola®Det L116N generates excellent viscosity and is ideal for use in non-alkanolamide shampoos, bath products, skin cleansers, and light-duty laundry detergents.

Learn more →

Cola®Det OKC-40

Potassium Cocoate Soap

Cola®Det OKC-40 is ideal for formulators seeking organic certification who plan to label their products as “Made with Organic…” and be in certified compliance with the National Organic Program (7CFR Part 205). Cola®Det OKC-40 is derived from 70% or greater raw ingredients and is processed to meet the Certified Organic requirements.

Cola®Det OKC-40 is a premium quality potassium cocoate soap that exhibits excellent flash foam, excellent color and low odor. Cola®Det OKC-40 is biodegradable, made from natural and renewable resources, and preservative-free – making it ideal for natural formulations, including high lathering soaps and cost-effective cleansers.

 


Cola®Det OKC-40 is “Derived Natural” with a Natural Origin Index of 1.0 in accordance with ISO 16128 guideline.

 

Learn more →

Cola®Dol 173B

Ethoxylated Alcohol

Cola®Dol 173B is a moderate foam nonionic performance blend of ethoxylated alcohols effective in transportation cleaning and industrial degreasing. The combination of ethoxylates provides excellent wetting, emulsification and detergency.

Learn more →

Cola®Dol 900

Ethoxylated fatty alcohol

Cola®Dol 900 is high-performance, environmentally-friendly nonionic surfactants designed specifically for ease of re-formulation when replacing nonyl phenol ethoxylates.

Learn more →

Cola®Dol 901

Alcohol Ethoxylate, Nonionic Surfactant Blend

Cola®Dol 901 is a multifunctional nonionic surfactant and provides better degreasing and cleaning than NPE surfactants or other NPE-alternatives. Cola®901 is formulated to be highly compatible with other surfactants and solvents, and highly effective in use, providing excellent cleaning and degreasing at reduced concentrations. Cola®901 performs as well as standard nonionic surfactants, but off ers outstanding cleaning performance and a favorable environmental profile.

Learn more →

Cola®Dol 902

Ethoxylated Alcohol

Cola®Dol 902 is a multifunctional non-ionic surfactant and provides better degreasing and cleaning than NPE surfactants or other NPE-alternatives. Cola®Dol 902 is formulated to be highly compatible with other surfactants and solvents, and highly effective in use, providing excellent cleaning and degreasing at reduced concentrations.

Learn more →

Cola®Dol 91-6

Detergent Range Alcohol Ethoxylate

Cola®Dol 91-6 is a high active nonionic surfactant. Cola®Dol 91-6 is stable in both aqueous acidic and alkaline solutions, allowing for application in a wide range of products.

Learn more →

Cola®Drill 300

Concentrated Water-soluble Brine Lubricant Additive

Cola®Drill 300 lubricant reduces friction in seawater, sodium chloride, sodium bromide, calcium chloride and calcium bromide completion fluids. The chemistry offers exceptional reduction in metaI-to-metal friction when added to brine-base completion or drilling fluids at extremely low concentrations.

Cola®Drill 300 lubricant reduces torque and drag up to 90% at extremely low concentrations in field applications.

Learn more →

Cola®Dry DAB

Water Soluble Silicone Wax Additive for Shine and Protection

Cola®Dry DAB is a water-soluble wax additive used in vehicle care formulations for improved shine and surface protection. Cola®Dry DAB is non-flammable and can be formulated to create high-performance protectants for both exterior and interior vehicle surfaces.

Learn more →

Cola®Dry N4

Concentrated Vehicle Drying Agent

Cola®Dry N4 is a 100% active, non-flammable concentrated drying agent for professional car washes. For direct injection, this product can be used at 1500–2000:1 dilution or diluted to different concentrations.

Learn more →

Cola®Dry QS100

Silicone Wax Additive

Cola®Fax 3373

Butyl Diethylene Glycol Low Foaming - Bleach Tolerant - High Alkaline

Cola®Fax 3373, a low foaming, water soluble, aliphatic-based phosphate ester, is an effective hydrotrope/solubilizer for conventional and low foam nonionic surfactants in alkaline systems. Additionally, it demonstrates excellent compatibility in sodium hypochlorite formulations. This product is recommended for use in spray, soak tank, and in-place pipeline cleaners.

Learn more →

Cola®Fax 3374

Phenol-6 Low Foaming - Hydrotrope

Cola®Fax 3374 is a 100% active aromatic alcohol phosphate ester with medium foam. It is an excellent hydrotrope for nonionic surfactant in high alkaline-based formulations. It is used as a hydrotrope for nonionic surfactants in high alkaline applications.

Learn more →

Cola®Fax 3375

Phenol-6 Low Foaming - High Alkaline

Cola®Fax 3375 is a 95% active phosphate ester. Cola®Fax 3375 is effective as a low foam detergent and hydrotrope. Any foam that is generated in use is fast breaking. Cola®Fax 3375 is especially effective in coupling low foam or capped nonionics into liquid alkaline cleaners.
Compatible with most surfactants and high builder, high caustic formulations, Cola®Fax 3375 brings detergency to the formulation as well as hydrotroping properties.

Learn more →

Cola®Fax 3376

Nonylphenol-9 Mid Foaming High Alkaline Phosphate Ester

Cola®Fax 3376 is a mixture of mono and di-phosphate esters derived from an ethoxylated nonionic surfactant, which exhibits outstanding emulsifying, lubricating, antistatic, detergency and corrosion inhibiting properties. Cola®Fax 3376 is supplied as the free acid and can be easily converted to the salt of an alkali metal, amine or ammonia by a simple neutralization with the desired base.

Learn more →

Cola®Fax 3378

Butyl Ethylene Glycol Low Foaming - Hydrotrope

Cola®Fax 3378 is an aliphatic low foam wetting agent and cleaner with good stability in alkaline solutions. It is useful in low foam wetting and cleaning applications.

Learn more →

Cola®Fax 3380

Aliphatic Phosphate Ester

Cola®Fax 3380 is a 100% active aliphatic wetting agent and cleaner with good stability and surface activity when used with high concentrations of sodium hydroxide and silicate builders. Cola®Fax 3380 may also be used as a coupling agent in alkaline detergent formulations. It is also a good dispersing agent in emulsion polymerization.

Learn more →

Cola®Fax 3383

Phenoxyethanol Hydrotrope - Wetting - High Alkaline

Cola®Fax 3383 is an organic phosphate ester with ultra low foam. With 50 active potassium salt, it is designed for use as a hydrotrope and/or solubilizer for conventional and low-foam nonionics in alkaline systems. It is useful in conventional and low-foam nonionics in alkaline systems. It is also used in place of SXS to solubilize LAS and alkanolamide formulas such as liquid hand dishwashes.

Learn more →

Cola®Fax 3384

2-EH Low Foaming - Hydrotrope

Cola®Fax 3384 is a 100% active, low foam branched alcohol phosphate ester in the acid form, with good wetting and defoaming capabilities. It is useful in metal working lubricants and synthetic cutting fluids. It is also used in spray applications for hard surface cleaners and as a hydrotrope in built alkaline systems.

Learn more →

Cola®Fax 3386 is a 100% active, low foaming, aromatic based, phosphate ester with characteristics of low coefficient of friction, corrosion inhibition, high electrolyte compatibility, hydrotroping, and low toxicity. It is used in metal cleaning, chain lubricating, hydrotroping, maintenance cleaning.

Learn more →

Cola®Fax 3396

Low Foam Aromatic-Based Phosphate Ester

Cola®Fax 3396 is a 50% active, low foaming, aromatic based, phosphate ester with characteristics of low coefficient of friction, corrosion inhibition, high electrolyte compatibility, hydrotroping, and low toxicity. It is used in metal cleaning, chain lubricating, hydrotroping, maintenance cleaning.

Learn more →

Cola®Fax 3397

Alcohol Ethoxylate Phosphate Ester

Cola®Fax 3397 is a long chain, aliphatic phosphate ester designed for a variety of formulations including metalworking fluid applications. It provides excellent extreme pressure and lubricity characteristics as well as emulsification and rust protection properties for both ferrous and nonferrous metallurgies. As supplied, Cola®Fax 3397 is soluble in paraffinic and naphthenic oil. It is soluble in water by pH adjustment or by the incorporation of water-soluble co-surfactants.

Learn more →

Cola®Fax 3611

Low Foam Hydrotrope Phosphate Ester

Cola®Fax 3611 is a low-foaming organic phosphate ester surfactant that provides effective hydrotroping properties in highly built liquid detergent formulations. Due to its compatibility and chemical stability in concentrated alkaline builder systems, it is particularly useful as a solubilizer for nonionics and other surfactants in high electrolyte applications. Cola®Fax 3611 is compatible for use in hypochlorite containing formulations.

Cola®Fax 3611 is stable in up to 35% sodium hydroxide solution.

Learn more →

Cola®Fax 3660

C91-6EO Based Phosphate Ester

Cola®Fax 3660 is an anionic surfactant for industrial applications that provides good wetting, detergency, hydrotroping, and electrolyte stability. It is fully biodegradable. It is useful in hard surface cleaning, emulsion polymer emulsifier, vehicle cleaners, corrosion inhibitors, lubricant anti-wear properties and textile wetting.

Learn more →

Cola®Lipid C

Cocamidopropyl PG-Dimonium Chloride Phosphate

Cola®Lipid C belongs to a family of products that are multifunctional, natural triglyceride phospholipids similar to phospholipids that occur naturally in the body. Cola®Lipid C is a coconut oil derived phospholipid composed predominantly of diester and triester phosphatides with multiple chain groups. Cola®Lipid C displays a broad range of functional attributes including gentle cleansing and foaming properties, anti-irritation effects when combined with anionic surfactants, unusually high substantivity, long-lasting skin conditioning, and broad spectrum antimicrobial activity.

Learn more →

Cola®Lipid DCCA

Biomimetic Phospholipid Complex

Cola®Lipid DCCA is a plant-derived multi-functional phospholipid, combining gentle cleaning, mildness and excellent substantivity with broad spectrum antimicrobial activity. It can be utilized to minimize preservative requirements or to formulate self-preserved systems. Cola®Lipid DCCA is compatible with all surfactant types and is ideal for use in personal care cleansers where mildness and antimicrobial properties are of importance.

Learn more →

Cola®Lipid GS

Grapeseed Amidopropyl PG-Dimonium Chloride Phosphate

Cola®Lipid GS is multifunctional, natural triglyceride organic phospholipid complex. It is designed to mimic natural phospholipids that occur naturally in the body and deposits essential fatty acids on skin. Cola®Lipid GS is derived from sustainable pure grapeseed oil and is highly substantive to hair and skin. The flavonoid oligomeric procyanidin found in grapeseed oil is an incredibly strong antioxidant, about 50 times stronger than antioxidants like vitamin C and E, and can provide protection against cellular and tissue damage caused by free radicals. By taking advantage of this oil’s unique composition, Cola®Lipid GS offers a combination of performance properties for personal and health care applications rarely achieved with one single ingredient.

Learn more →

Cola®Lipid SAFL

Linoleamidopropyl PG-Dimonium Chloride Phosphate

Cola®Lipid SAFL is multifunctional, natural triglyceride organic phospholipid complex. It is designed to mimic natural phospholipids that occur naturally in the body and deposits essential fatty acids on skin. Cola®Lipid SAFL is derived from sustainable pure safflower oil and is highly substantive to hair and skin. Safflower oil contains a high level (80%) of linoleic acid, and it provides one of the principal essential fatty acids that is needed to maintain healthy skin. By taking advantage of this oil’s unique composition, Cola®Lipid SAFL offers a combination of performance properties for personal and health care applications never before achieved with one single ingredient.

Learn more →

Cola®Lipid SIL

Biomimetic Phospholipid/Silicone Blend

The Cola®Lipid products are multifunctional, natural oil derived phospholipids composed predominantly of diester and triester phosphatides. Through the careful selection of specific natural oils and fatty acids as raw materials, the Cola®Lipid products deliver a broad range of functional properties which include gentle cleansing, anti-irritation effects, unusually high substantivity, long lasting conditioning, broad spectrum antimicrobial activity, emulsification attributes, and exceptional mildness to skin and eyes.

Learn more →

Cola®Lipid SOTA

Naturally-Derived Biomimetic Phospholipid Derived from Sustainable Pure Safflower Oil

Cola®Lipid SOTA offers multifunctional properties including high substantivity, gentle cleansing, low-irritation, and long-lasting conditioning. Cola®Lipid SOTA is derived from sustainable pure safflower oil and designed to mimic natural phospholipids that occur naturally in the body and deposits essential fatty acids on skin. It has excellent compatibility with many surfactants, including anionics, and can be formulated into many personal care products.

Learn more →

Cola®Lipid ST

Stearamidopropyl PG-Dimonium Chloride Phosphate

Cola®Lipid ST is multi-functional, natural triglyceride organic phospholipid complex. It is designed to mimic natural phospholipids that occur naturally in the body and deposits essential fatty acids on skin. Cola®Lipid ST is derived from sustainable palm and is a highly effective conditioner for skin. Cola®Lipid ST produces a refined, highly emollient skin treatment product and provides stabilization to emulsions. Cola®Lipid ST is exceptional for heavy-bodied and high viscosity formulations.

Learn more →

Cola®Liquid BL

Liquid Lauramide MIPA

Cola®Liquid BL is an easy-to-use liquid cold-mix version of Lauramide MIPA. That means there’s no heating required for the
Lauramide MIPA in your formulation – just use it as you would any liquid ingredient at room temperature into clear products. This
product can also be used to solubilize fragrances into formulations.

Learn more →

Cola®Liquid DC2

Fatty diisopropanolamide, modified (Cocamide DIPA)

Cola®Liquid DC-2 is a (modified 2:1 fatty acid diisopropanolamide) DEA-free fatty amide designed for effective detergency and wetting while demonstrating controlled foaming.

Learn more →

Cola®Liquid DCM

Fatty diisopropanolamide, modified

Cola®Liquid DCM is a DEA-free fatty amide blend designed for incorporation into most water dilutable products. In addition to corrosion inhibition, Cola®Liquid DCM provides high detergency for effective cleaning, and prevents soil from re-depositing after being loosened. The unique wetting properties are intended to allow dispersion over oily surfaces without creeping under and loosening flooring adhesives. The high viscosity of Cola®Liquid DCM delivers a thick, pleasing consistency for formulations, and the controlled foam provides satisfactory suds without disproportionate volume.

Learn more →

Cola®Liquid DCT

Modified Cocamide DIPA and Tall Oil Soap

Cola®Liquid DCT is a Modified Cocamide DIPA and Tall Oil Soap. Cola®Liquid DCT is an excellent substitute for 2:1 DEA amides. Colonial Chemical’s Cola®Liquid products consist of completely liquid, consumer acceptable non-DEA amides that perform like traditional alkanolamide surfactants. Cola®Liquid DCT can be used in any application where traditional alkanolamide surfactants have been used. Cola®Liquid DCT is effective in a wide variety of household and industrial products.

Learn more →

Cola®Liquid DM

Myristamide DIPA

Cola®Liquid DM is a Myristamide DIPA non-DEA substitute for Myristamide DEA. Colonial Chemical’s Cola®Liquid products consist of completely liquid, consumer acceptable non-DEA amides that perform like traditional alkanolamide surfactants. Cola®Liquid DM can be used in any application where traditional alkanolamide surfactants have been used without reformulation. Cola®Liquid DM is effective in a wide variety of personal care products.

Learn more →

Cola®Liquid DO

Soyamide DIPA

Cola®Liquid DO is a modified Soyamide DIPA. Cola®Liquid DO is a next generation liquid non-ionic surfactant used to improve foam, viscosity and feel properties of personal care formulations. Formulations that use Cola®Liquid DO exhibit a noticeable improvement in their aesthetics over non-amide formulations. Cola®Liquid DO is a useful Soyamide DIPA derivative and recommended for “DEA-free” formulations.

Learn more →

Cola®Liquid DT

Tallate DIPA

Cola®Liquid DT is a non-ionic 1:1 diisopropanolamine (DIPA) amide of tall oil fatty acids. Colonial Chemical’s Cola®Liquid products consist of completely liquid, consumer acceptable non-DEA amides that perform like traditional alkanolamide surfactants. Cola®Liquid DT provides viscosity building and foam stabilizing properties. The product is liquid and very mild to eyes and skin. Cola®Liquid DT can be used as a substitute for 1:1 DEA amides in any application where traditional alkanolamide surfactants have been used.

Learn more →

Cola®Liquid DT2

Tallate DIPA

Cola®Liquid DT-2 is a non-ionic 2:1 diisopropanolamine (DIPA) amide of tall oil fatty acids. Colonial Chemical’s Cola®Liquid products consist of completely liquid, consumer acceptable non-DEA amides that perform like traditional alkanolamide surfactants. Cola®Liquid DT-2 can be used as a substitute for 2:1 DEA amides in any application where traditional alkanolamide surfactants have been used.

Learn more →

Cola®Liquid FACD

Fatty Acid Amido Complex

Cola®Liquid FACD is a fully biodegradable DEA-free fatty acid amido complex which is exceptionally soluble and stable in systems containing high concentrations of sodium hydroxide, potassium hydroxide, sodium and potassium phosphates, sodium silicates and sodium carbonates. It is ideally suited for use in a wide range of alkaline cleaners.
Cola®Liquid FACD offers excellent detergency and wetting properties, particularly silicate containing formulations. In most heavy-duty detergent systems, it offers superior performance and economy when compared to systems requiring the use of hydrotropes such as amphoterics and/or phosphate esters.
Cola®Liquid FACD is a low to moderate foamer, producing lower and less stable foam than ethoxylated nonionics and significantly less foam than LAS. Straight aqueous solutions or alkaline solutions which contain up to 15% aqueous solutions of Cola®Liquid FACD show no appreciable increase in the viscosity, even under alkaline conditions.

Learn more →

Cola®Lube 3440

Complex Polyester, Acidic

Cola®Lube 3440 is a lubricity booster and water-dispersable corrosion inhibitor for soluble oils, semi-synthetic and neat oil metalworking fluids. Cola®Lube 3440 may also be used as synthetic base fluid for rolling emulsions and is suitable for mineral-oil free formulations.

Learn more →

Cola®Lux C-10

Decylamine Oxide

Cola®Lux C-8

Octylamine Oxide

Cola®Lux C-8 is an octyldimethylamine oxide from a narrow cut amine, that provides good wetting and very low foaming characteristics. It is compatible with cost surfactants and because there are no amide or ester groups in its chemical structure, Cola®Lux C-8 will not hydrolyze in acid formulations.
Cola®Lux C-8 is also stable in highly alkaline and strong electrolyte systems. Cola®Lux C-8 is also uselful in hydrogen peroxide and sodium hypochlorite formulations, providing increased strike for better performance.

Learn more →

Cola®Lux CAO-35

Cocamidopropylamine Oxide

Cola®Lux CAO-35 is a multi-functional amine oxide that provides good detergency, exceptionally high foaming, and viscosity control properties. When combined in the proper ratio with alkyl sulfates or alkyl ether sulfates, Cola®Lux CAO-35 can be used to develop clear, mild, low pH shampoos/cleansers with substantial conditioning properties. It is useful in a variety of personal care and household applications.

High Purity – does not contain detectable* amount of nitrosamine contaminant.
(* <10 ppb reporting limit of 3rd party analysis)

  • Cola®Lux CAO-35 is currently approved for FOOD-USE as surfactant not to exceed 15% by weight in a formulated product; only for use with glyphosate under 40 CFR 180-910, as an inert ingredient in pesticide formulations.

Learn more →

Cola®Lux LMDO

Emulsifying and Foam Boosting Surfactant

Cola®Lux LMDO is a bio-based, non-ionic amine oxide with excellent emulsifying and dispersing properties. In formulation, ColaLux LMDO offers foam boosting and stabilizing, and can reduce the irritation of the other surfactants. It is shipped preservative-free.

Learn more →

Cola®Lux LO

Amine Oxide Surfactant

SAFER CHOICE
The Safer Choice Program of the U.S. Environmental Protection Agency certified Cola®Lux LO as Acceptable for use in Safer Choice-certified products and for listing on CleanGredients as a surfactant.

High Purity – does not contain detectable* amount of nitrosamine contaminant.
(* <10 ppb reporting limit of 3rd party analysis)

Learn more →

Cola®Lux LO MB

Amine Oxide Surfactant | Mass Balance RSPO

NGO Certifications

  • Whole Foods Market® Eco-Scale™ ingredient

SAFER CHOICE
The Safer Choice Program of the U.S. Environmental Protection Agency certified Cola®Lux LO MB as Acceptable for use in Safer Choice-certified products and for listing on CleanGredients as a surfactant.

MASS BALANCE
In keeping with Colonial Chemical’s commitment to sustainable raw material sourcing, this product is derived from palm oil that contributes to the production of certified sustainable palm oil. More information on www.RSPO.org.

High Purity – does not contain detectable* amount of nitrosamine contaminant.
(* <10 ppb reporting limit of 3rd party analysis)

Learn more →

Cola®Lux MO

Amine Oxide Surfactant

Cola®Lux MO is an amine oxide-based zwitterionic surfactant with a C14 (tetradecyl) alkyl tail. It is used as a foam stabilizer and hair conditioning agent in shampoos and conditioners. Like other amine oxide-based surfactants, it is antimicrobial, being slightly more effective than lauryldimethylamine oxide against the common bacteria S. aureus and E. coli.

Learn more →

Cola®Lux MO-HP

Amine Oxide Surfactant

Cola®Lux MO-HP is an amine oxide-based surfactant with a C14 (tetradecyl) alkyl tail. It is used as a foam stabilizer and hair conditioning agent in shampoos and conditioners.

Learn more →

Cola®Lux O2

Oleamine oxide

Cola®Lux O2 is an amine oxide that provides excellent viscosity building, foam stability and moderate foam boosting. Cola®Lux O2 is compatible with most surfactants and will not hydrolyze in acid or alkaline systems due to the absence of amide or ester groups. Used in low concentrations, Cola®Lux O2 provides a silky feel to body washes, liquid hand soaps and other skin cleansers. Cola®Lux O2 may also function as a viscosity builder and an anti-static agent.

Cola®Lux O2 is shipped preservative-free.

Learn more →

Cola®Lux SO

Stearamine Oxide

Cola®Lux SO is a 25% active stearamine oxide. Cola®Lux SO is an excellent conditioning agent with conditioning properties comparable to quaternary ammonium compounds. Cola®Lux SO is slightly water soluble and solubility can be enhanced by blending with anionic surfactants to offer a clear formulation. Cola®Lux SO is an effective viscosity builder and useful in creating pleasing shampoo and hair rinse products. Cola®Lux SO is also gentle to both skin and eyes, causing no dermal or ocular irritation at 5% or less active use.

Learn more →

Cola®Mate BD-RM

Mild Additive for Hand Washes

Cola®Mate BD-RM is an anionic surfactant useful in boosting foam and lowering viscosity in foam pump applications. While being exceptionally mild, Cola®Mate BD-RM can help reduce the irritation of other anionic surfactants in formulation. It is compatible with lauryl sulfates, laureth sulfates and alpha olefin sulfonates and without hindering performance. In formulation, Cola®Mate BD-RM can leave a smooth skin feel to the skin after washing and drying.

Learn more →

Cola®Mate DSLS

Liquid Sulfosuccinate

Cola®Mate DSLS is a very mild, nearly colorless, sulfosuccinate derived from a three mole ethoxylated lauryl alcohol. Cola®Mate DSLS provides excellent foam properties which can be enhanced by blending with sodium laureth sulfate. The combination of these two surfactants provides a product that is mild to both skin and eye, has good foam performance, and improves viscosity response. This grade is preserved with KATHON™ CG.

Learn more →

Cola®Mate DSLS MB

Liquid Sulfosuccinate | Mass Balance RSPO

Cola®Mate DSLS MB is a very mild, nearly colorless, sulfosuccinate derived from a three mole ethoxylated lauryl alcohol. Cola®Mate DSLS MB provides excellent foam properties which can be enhanced by blending with sodium laureth sulfate. The combination of these two surfactants provides a product that is mild to both skin and eye, has good foam performance, and improves viscosity response. This grade is preserved with KATHON™ CG.

MASS BALANCE
In keeping with Colonial Chemical’s commitment to sustainable raw material sourcing, this product is derived from palm oil that contributes to the production of certified sustainable palm oil. More information on www.RSPO.org.

Learn more →

Cola®Mate DSLS-BA

Liquid Sulfosuccinate

Cola®Mate DSLS-BA is a very mild, nearly colorless, sulfosuccinate derived from a three mole ethoxylated lauryl alcohol. Cola®Mate DSLS-BA provides excellent foam properties which can be enhanced by blending with sodium laureth sulfate. The combination of these two surfactants provides a product that is mild to both skin and eye, has good foam performance, and improves viscosity response.

This grade is preserved with benzoic acid.

Learn more →

Cola®Mate DSLS-BA MB

Liquid Sulfosuccinate | Mass Balance RSPO

Cola®Mate DSLS-BA is a very mild, nearly colorless, sulfosuccinate derived from a three mole ethoxylated lauryl alcohol. Cola®Mate DSLS-BA provides excellent foam properties which can be enhanced by blending with sodium laureth sulfate. The combination of these two surfactants provides a product that is mild to both skin and eye, has good foam performance, and improves viscosity response.

This grade is preserved with benzoic acid.

Learn more →

Cola®Mate LA-100 MB

High Foaming, Mild Surfactant | Mass Balance RSPO

Cola®Mate LA-100 MB is a spray dried, high foaming, mild sulfosuccinate surfactant with good detergency. ColaMate LA-100 MB may be used in powdered products where mildness is important. ColaMate LA-100 MB may be used to increase the concentration of aqueous systems for improved performance and mildness.

MASS BALANCE RSPO
In keeping with Colonial Chemical’s commitment to sustainable raw material sourcing, this product is derived from palm oil that contributes to the production of certified sustainable palm oil. More information on www.RSPO.org.

Cola®Mate LA-100 MB is “Derived Natural” with a Natural Origin Index of 0.76 in accordance with ISO 16128 guideline.

Learn more →

Cola®Mate LA-40 MB

High-Foaming, Mild Surfactant | Mass Balance RSPO

Cola®Mate LA-40 MB is a very light colored, mild sulfosuccinate surfactant derived from natural lauryl alcohol. Cola®Mate LA-40 MB is more than 65% bio-based carbon content due to the vegetable origin of the lauryl alcohol used in the product. Cola®Mate LA-40 MB is sulfate-free, PEG-free and 1,4-dioxane-free – making it ideal for natural based, sulfate-free formulations.

Cola®Mate LA-40 MB provides very dense, voluminous foam when used to formulate personal cleansers, is mild to eyes and useful in sensitive skin cleansers. Despite its high Krafft point, Cola®Mate LA-40 MB can be used to formulate clear products.

MASS BALANCE RSPO
In keeping with Colonial Chemical’s commitment to sustainable raw material sourcing, this product is derived from palm oil that contributes to the production of certified sustainable palm oil. More information on www.RSPO.org.

Cola®Mate LA-40 MB is “Derived Natural” with a Natural Origin Index of 0.76 in accordance with ISO 16128 guideline.

Learn more →

Cola®Mate OPV

Vegetable-Derived Amido Sulfosuccinate

Cola®Mate OPV is a vegetable-derived sulfosuccinate half ester of oleamide MIPA. Used in both personal care and industrial applications, it is a very mild surfactant to eyes and skin. When blended with high foaming anionic surfactants, Cola®Mate OPV will reduce irritation without significantly reducing foam. It contributes to a luxurious foam and skin feel in personal care cleansers and can be used to boost viscosity in traditional cleansing systems.

Learn more →

Cola®Mate SI

Disodium PEG-12 Dimethicone Sulfosuccinate

Cola®Mate SI is a very mild sulfosuccinate surfactant derived from water soluble silicone copolymer. Cola®Mate SI is useful in non-irritating skin cleansing and specialty applications. Cola®Mate SI imparts foam that is easily rinsed and reduces the irritation of other anionics when formulated together. Cola®Mate SI is significantly milder than SLS, SLES-2 and Sodium Cocoyl Glutamate. In facial cleansing this mild character will reduce the irritation coming from harsh anionic surfactants.

Learn more →

Cola®Mid 16

Oleamide MIPA

Cola®Mid 16 is a unique non-ionic surfactant for use in a variety of applications. Cola®Mid 16 has excellent corrosion inhibition properties on metal and has use in lubricants as both an emulsifier and a corrosion inhibitor. Cola®Mid 16 is also useful in preparing water-in-oil invert emulsions for polymerization, leading to high molecular weight polymers such as those used in water treatment. Cola®Mid 16 is also useful as a low HLB emulsifier in all continuous phase emulsions.

Learn more →

Cola®Mid 3458

Linoleamide DEA

Cola®Mid 3458 is a linoleic diethanolamide (INCI Designation: Linoleamide DEA) designed to provide excellent foam stabilization, viscosity building, conditioning, and emulsification properties in shampoos, skin cleansers, and other personal care products. For industrial applications, it is an effective thickener and emulsifier for a variety of oils and is useful in the development of micro-emulsion detergent and solvent-based cleaners.

Learn more →

Cola®Mid C

Cocamide DEA

Cola®Mid C is an all-purpose cocamide diethanolamide that provides foam boosting, foam stabilization, and thickening properties in a variety of personal care formulations.

Learn more →

Cola®Mid CMA

Cocamide MEA

Cola®Mid CMA is a 1:1 monoethanolamide supplied as an easy-to-handle, flake for use as a thickener and foam stabilizer in personal care products.

Learn more →

Cola®Mid CMPA

DEA-Free, High Purity Alkanolamide

Cola®Mid CMPA is a 1:1 cocamide monoisopropanolamide that is 100% MEA and DEA free. Cola®Mid CMPA provides foam stability (with emollient and anti-corrosive effects) and enhanced viscosity response. Featuring very low residual reactants and by-products, Cola®Mid CMPA is especially suitable for more “natural” formulations and stable at neutral, alkaline and acidic systems.

Learn more →

Cola®Mid HPC

Capramide DEA

Cola®Mid HPC has been developed specifically to increase flash foam. At concentrations of 1 – 3%, in a variety of cosmetic products such as shampoos, bubble baths, bath oils, etc. a significant increase in flash foam will be noted. Cola®Mid HPC
also augments the foam boosting and foam stabilization properties of other amides without significantly affecting viscosities. Cola®Mid HPC is an effective emulsifier and solubilizing agent in cosmetic creams, lotions and other toiletry products. As a result of these functions, it can also be used as a viscosity control agent in these applications.

Learn more →

Cola®Mid LM-73

Solid Lauramide DEA

This product is a mixed diethanolamide designed to provide optimum viscosity building properties, while exhibiting good, dense foaming properties and foam stability. Cola®Mid LM-73 also exhibits lubricity and conditioning characteristics and is an excellent emulsifier for various oils. Cola®Mid LM-73 is useful in bath gels, gel shampoos, liquid soaps, and facial cleansers.

Learn more →

Cola®Mid LMA

Lauramide MEA

Cola®Mid LMA is a methyl ester based amide and is a very effective foam stabilizer and thickening agent for anionic based cleansers.

Learn more →

Cola®Mid LMPA

DEA-Free Lauramide MIPA

Cola®Mid LMPA is a refined monoisopropanolamide, suitable for use in cosmetic and household formulations. Cola®Mid LMPA offers excellent performance for building viscosity and stabilizing foam. With very low residual free amine, Cola®Mid LMPA is an appropriate replacement for Diethanolamine (DEA) or Monoethanolamine (MEA). There is no DEA present in Cola®Mid LMPA.

Learn more →

Cola®Mine 1-76

Modified 2:1 fatty acid diethanolamide

Cola®Mine 1-76 is a modified 2:1 fatty acid diethanolamide that provides effective detergency and wetting while demonstrating controlled foaming. It is ideal for use in hard surface cleaners, chain lubricants, and vibratory finishing compounds.

Learn more →

Cola®Mine 11CM-MOD

Coconut Diethanolamide, Modified

Cola®Mine 1281

Modified Alkanolamide

Cola®Mine 1281 is a unique 2:1 modified alkanolamide. This product is finding wide use in industrial hard surface cleaners, such as strippers and degreasers. Cola®Mine 1281 is biodegradable and is well suited for formulating “Green Cleaners”.

Learn more →

Cola®Mine CDA is a 2:1 coconut diethanolamide that is an effective detergent, thickener, and wetting agent in various degreasers, spray washes, and general purpose cleaners.

Learn more →

Cola®Mine CDM

Cocamide Diethanolamide Modified

Cola®Mine CDM is a modified 2:1 cocamide diethanolamide that functions as an excellent detergent and emulsifier. The amide, diethanolamine, and soap content vary in each Cola®Mine product depending on the intended function. Cola®Mine CDM provides excellent soil dispersing, potent wetting, good lubricity, and rust inhibition characteristics in hard surface cleaners, chain lubricants, and vibratory finishing compounds.

Learn more →

Cola®Mine RA-26

Fatty Acid Diethanolamide

Cola®Mine RA-26 has viscosity and suspension capabilities in alkaline cleaners such as waterless hand cleaners and formulas containing pumice or calcium carbonate.

Learn more →

Cola®Mulse 3GO

100% All-Natural, Multi-Functional Emulsifier

Cola®Mulse 3GO is a mono-ester of oleic acid and a glycerin polymer containing an average of three glycerin units. It is a multi-functional emulsifier providing stable emulsions in intermediate HLB systems where two or more other emulsifiers might be used. Cola®Mulse 3GO requires low usage concentrations of 1.0 – 4.0%. It is capable of creating emulsions with good heat and freeze/thaw stability.

Cola®Mulse 3GO is used in a variety of cosmetic and specialized personal care applications, in particular as an emulsifier for W/O creams with brilliant appearance and pleasant properties. It is also useful in cleanser formulations with oil-to milk or oil-to-lotion transformative properties.

Learn more →

Cola®Mulse C356 / D356

Emulsifiers for aromatic solvents, kerosene, and mineral spirits

Cola®Mulse C-356 and Cola®Mulse D-356 are effective emulsifiers for aromatic solvents, kerosene, and mineral spirits. They provide excellent wetting, detergency, and rinsing properties to solvent based cleaners. These products are ideally suited for use in paint strippers, heavy-duty degreasers, and oil rig cleaners.

NOTE: Cola®Mulse C-356 and Cola®Mulse D-356 are chemically the same. C-356 contains a minor amount of alcohol solvent. D-356 contains a minor amount of glycol solvent.

Learn more →

Cola®Mulse CA-15

Multifunctional Amine Alkoxylate

Cola®Mulse CA-15 is a multifunctional amine alkoxylate used as an emulsifi er and lubricant in metalworking formulations. Cola®Mulse CA-15 may also used in textile applications for antistatic properties. The polyoxyethylated fatty amines are mildly cationic surfactants that become more nonionic in nature with increasing ethylene oxide content. Cola®Mulse CA-15 is substantive to metals, glass, textiles, plastics, and clays.

Learn more →

Cola®Mulse CS400

Highly Effective Emulsifier for Spray Waxes in Transportation Cleaning

Cola®Mulse CS400 is a non-flammable cationic emulsifier designed to create micro emulsions of mineral seal oil and other hydrophobes in water. The combination of this powerful cationic surfactant with the mineral seal oil makes very effective drying agents for automatic car wash systems to remove water with balanced beading and sheeting actions.

Learn more →

Cola®Mulse FE

Fragrance Emulsifier

Cola®Mulse FE is a 100% active, nonionic product designed to incorporate oil-based fragrances in anionic water-based formulations.
By pre-blending Cola®Mulse FE with a fragrance of choice, the formulator can incorporate large amounts of oil-based fragrances or difficult fragrances into anionic water-based formulations while maintaining the clarity and performance characteristics of the finished product. We recommend that Cola®Mulse FE be used at ratios of 3 to 1 up to 6 to 1 of fragrance to Cola®Mulse FE.

Learn more →

Cola®Nol 14

Polyglycerol Oleate

Cola®Nol 14 is a PEG-free distilled polyglycerol ester based on vegetable oleic acid. It is an excellent emulsifier enabling water and oil to mix with good heat and cold stability. Cola®Nol 14 is compatible with all kinds of cosmetic oils and active ingredients with very pleasant application properties.

APPLICATION USE LEVEL
Cola®Nol 14 can be added to formulas as is, usual concentration 2 – 10%.

AEROSOL CORROSION PROTECTION
Cola®Nol 14 can be used as a corrosion inhibitor in W/O emulsions for aerosols. Typical use rates are 0.25% to 1.0%. May also be used in combination with Cola®Cor 600 for additional rust prevention.

Cola®Nol 14 is listed on the EPA Inert List for Food Use (40 CFR 180.910) and Non-Food Use.

Learn more →

Cola®Quat C15

Quaternary Ethoxylated Coco Amine Ethyl Sulfate

Cola®Quat C15 is a naturally-derived ethoxylated quaternary amine at nearly 100% active. When used with other surfactants – especially nonionic surfactants – Cola®Quat C15 will greatly boost degreasing and cleaning performance. It will also help stabilize foam and improve streak-free rinsing. The ethosulfate quats will help reduce the corrosivity found with chloride quats. Cola®Quat C15 may not be compatible with anionic surfactants at high concentrations.

Learn more →

Cola®Quat ISD

Anionic Compatible Quaternary Conditioner

Cola®Quat ISD is an effective, anionic compatible quaternary conditioner. It is based on isostearic acid and is sold in an anhydrous, inert solvent. It is approximately 75% active and can be used in a variety of household and personal care products to add lubricity and antistatic properties.

Clear, conditioning shampoos and body cleansers can be formulated with Cola®Quat ISD, along with hand cleaners other bath products. Cola®Quat ISD may also be used as an antistatic agent.

In shampoos and body wash products, use 0.3 to 1.0% depending on the degree of conditioning desired. In hair conditioner products, about 0.5 to 1.0% are typical use levels.

Learn more →

Cola®Quat SME

Soyethyl Morpholinium Ethosulfate

Cola®Quat SME is a cationic surfactant designed to neutralize a wide range of odors. The ingredient functions by complexing or neutralizing specific organic molecules and reducing their concentration in the vapor phase. Its low active level and full solubility in water makes it ideal for consumer deodorizer applications such as space deodorizers, carpet deodorizers, hard surface deodorizers, kitty litter and pet care. The ingredient may be used in a variety of personal care, household and industrial applications to reduce unpleasant odors.

Cola®Quat SME is “Derived Natural” with a Natural Origin Index of 0.63 in accordance with ISO 16128 guideline.

Learn more →

Cola®Solv IES

Isostearyl Ethylimidazolinium Ethosulfate

Ionic liquids are compounds that are liquids at low temperatures and functions as solvents, yet they have no VOC content and are environmentally safe. In addition these ionic liquids are categorized as salts that remain as liquids below 100°C. This class of compounds is fast gaining recognition as regulatory and environmental concerns close the door on traditional organic surfactants. Ionic Liquids represent a new technology with potential for use as solvent replacements. Their low vapor pressure makes them potential substitutes for highly volatile organic solvents, thus reducing the amount of pollution caused through solvent evaporation. Their non-flammable nature reduces the risk of fire hazard.

Cola®Solv IES and Cola®Solv OES are ionic liquids offering unique solvent capabilities and useful as replacements for some polar solvents. Both Cola®Solv IES and Cola®Solv OES are compatible with anionic surfactants and can aid in foam stabilization.

Cola®Solv IES and Cola®Solv OES are 100% active, liquid quaternary compound in addition to their solvent capability offer excellent antistatic, lubricating, fiber softening and corrosion inhibiting properties in aqueous and non-aqueous systems.

TEXTILE APPLICATION:

The unusual lubricating, antistatic, fiber softening and corrosion inhibiting properties suggest the use of Cola®Solv IES and Cola®Solv OES in synthetic coolants and lubricants, plastics, textile softeners and fiber lubricants. Inclusion of either product as surface treatments can aid significantly in static charge reduction.

INDUSTRIAL APPLICATIONS:

Cola®Solv IES and Cola®Solv OES can be used in cleaners to reduce the static charge on glass and metallic surfaces. Formulations with Cola®Solv IES and Cola®Solv OES allow water to be more freely rinsed from surfaces. The more uniform surfaces created by Cola®Solv IES and Cola®Solv OES rinse quicker and help prevent re-soiling or re-deposition.

Learn more →

Cola®Solv OES

Oleyl Ethylimidazolinium Ethosulfate

Ionic liquids are compounds that are liquids at low temperatures and functions as solvents, yet they have no VOC content and are environmentally safe. In addition these ionic liquids are categorized as salts that remain as liquids below 100°C. This class of compounds is fast gaining recognition as regulatory and environmental concerns close the door on traditional organic surfactants. Ionic Liquids represent a new technology with potential for use as solvent replacements. Their low vapor pressure makes them potential substitutes for highly volatile organic solvents, thus reducing the amount of pollution caused through solvent evaporation. Their non-flammable nature reduces the risk of fire hazard.

Cola®Solv IES and Cola®Solv OES are ionic liquids offering unique solvent capabilities and useful as replacements for some polar solvents. Both Cola®Solv IES and Cola®Solv OES are compatible with anionic surfactants and can aid in foam stabilization.

Cola®Solv IES and Cola®Solv OES are 100% active, liquid quaternary compound in addition to their solvent capability offer excellent antistatic, lubricating, fiber softening and corrosion inhibiting properties in aqueous and non-aqueous systems.

TEXTILE APPLICATION:

The unusual lubricating, antistatic, fiber softening and corrosion inhibiting properties suggest the use of Cola®Solv IES and Cola®Solv OES in synthetic coolants and lubricants, plastics, textile softeners and fiber lubricants. Inclusion of either product as surface treatments can aid significantly in static charge reduction.

INDUSTRIAL APPLICATIONS:

Cola®Solv IES and Cola®Solv OES can be used in cleaners to reduce the static charge on glass and metallic surfaces. Formulations with Cola®Solv IES and Cola®Solv OES allow water to be more freely rinsed from surfaces. The more uniform surfaces created by Cola®Solv IES and Cola®Solv OES rinse quicker and help prevent re-soiling or re-deposition.

Learn more →

Cola®Solv TES

Quaternized Alkyl Imidazoline

Cola®Solv TES is a cationic additive for improving rinse and drying, reducing static charges on surfaces, preventing corrosion adding lubrication to textiles and brushes and applying shine to hard surfaces.

Learn more →

Cola®Terge 102

Surfactant Blend for Water-Based Degreasers

Cola®Terge 102 is a high performance blend of surfactants designed for use in water-based degreasing and hard surface cleaning applications. It is a fast wetter for penetrating soils and surfaces and a powerful emulsifier while holding soils in suspension. Cola®Terge 102 is suitable for use in alkaline, acidic and general purpose cleaners. The simple combination of Cola®Terge 102 with or without builders makes an excellent water based degreaser.

Learn more →

Cola®Terge 226

Surfactant Blend for Water-Based Degreasers

Cola®Terge 226 is an optimized blend of nonionic and cationic surfactants, intended to be used for water-based degreasing. A cleaning formulation based on Cola®Terge 226 can often replace a solvent because of the efficient cleaning effect on grease and oil. When an oily soil contains a lot of soot and pigments, the cleaning effect will often be much better than with conventional products. A water-based alkaline cleaning formulation based using Cola®Terge 226 and appropriate complexing agent is a significant improvement compared with conventional alkaline cleaners.

Learn more →

Cola®Terge APDC

Surfactant Concentrate

Cola®Terge APDC is a cost effective, 100% active, liquid detergent concentrate that can be readily diluted and modified to develop a wide range of low cost, yet high performance household and industrial products. Cola®Terge APDC contributes high foaming, detergency, low irritation and excellent hard water tolerance. It is ideal for use in hand soaps, all purpose cleaners, and solvent cleaners.

Learn more →

Cola®Terge BCC

Brewery Cleaning Concentrate - High Beer Stone Removal

Cola®Terge BCC is a proprietary surfactant concentrate specifically designed for rugged performance in the food, beverage and dairy industries. Combining low foaming and outstanding performance, Cola®Terge BCC offers a means of quickly removing alkali scale that forms in tanks and transport vessels used by brewers, soft drink producers, dairy and juice transporters.

Cola®Terge BCC provides fast wetting, improved cleaning, lower foam and easy, quick rinsing for cleaning-in-place procedures. Cola®Terge BCC is suitable for high-pressure washdown applications with its free-rinsing abilities and high tolerance for electrolytes. It is also safer to handle and easy to formulate, remaining stable in high alkaline and acidic formulations, as well as readily soluble in caustic or cold water.

Learn more →

Cola®Terge FACC

Fatty acid amido complex detergent concentrate

Cola®Terge FACC is a fatty acid amido complex, which provides excellent wetting and detergency properties in medium and high electrolyte-based cleaning formulations. This detergent concentrate offers superior cost/effectiveness versus systems requiring the use of hydrotropes. Its foaming characteristics are low to moderate, producing a lower and less stable foam than ethoxylated nonionics. Cola®Terge FACC is ideal for use in heavy-duty floor cleaners and wax strippers. Product should be stored between 40°F and 120°F to maintain stability. Based upon chemical composition the product is expected to be completely biodegradable.

NOTE: Cola®Terge FACC is not recommended for acid systems.

Learn more →

Cola®Terge LFD-C

Alkaline Low Foam Surfactant

Cola®Terge LFD-C is a low foaming detergent concentrate offering outstanding detergency, wetting and rinsibility properties in acid and alkaline cleaners. Additionally, Cola®Terge LFD-C can be utilized to boost the detergency and rinsability of alkaline metal cleaner formulations based on capped low foam nonionic surfactants. Typical applications include spray, steam, and soak tank cleaning.

Cola®Terge LFD-C has been tested according to Method OECD 301D and determined to be readily biodegradable.

Learn more →

Cola®Teric 12HS MB

High Purity Thickener and Foam Boosting Surfactant | Mass Balance RSPO

Cola®Teric 12HS MB is a fatty alkyl amphoteric surfactant in the hydroxysultaine class. Cola®Teric 12HS MB is a high foaming, biodegradable surfactant that is compatible with virtually all other surfactants. It demonstrates excellent stability in both extreme acid and alkaline formulations and very stable in both acid and alkali formulations and can be solubilized at 2-3% in 30-40% caustic soda solutions. Cola®Teric 12HS MB is a unique foaming surfactant successfully used in sulfate-free and PEG-free formulations in industrial, household, and hair and body care applications.

Learn more →

Cola®Teric 1C

Sodium Cocoamphoacetate

Cola®Teric 1C, a plant derived alkyl imidazoline monocarboxylic acid amphoteric, provides wetting and detergency in textile and hard surface cleaners. For personal care applications, Cola®Teric 1C contributes mild cleansing, counter-irritancy, light conditioning, and high foaming properties. This product is ideal for use in fine fabric laundering and a wide range of personal care products.

Learn more →

Cola®Teric 2C

Disodium Cocoamphodiacetate

Cola®Teric 2C is a coco imidazoline-derived dicarboxylic acid amphoteric. It is one of mildest amphoteric surfactants of its class, provides a moderate lather and cleans without removing dermal lipids from the skin to give a rich, conditioning effect. Cola®Teric 2C is stable over a wide pH range and useful for institutional cleaners. Cola®Teric 2C may be used as the only surfactant in commercial products such as moist wipes.

Learn more →

Cola®Teric 2C-LV

Disodium Cocoamphodiacetate

Cola®Teric 2C-LV is a coco imidazoline-derived dicarboxylic acid amphoteric. Cola®Teric 2C-LV is a low viscosity process modification of Cola®Teric 2C that allows for handling without the need for heat and permits cold mix formulations – and easier to empty from containers. It is more versatile and tolerant of other additives permitting greater formulation latitude.

Cola®Teric 2C-LV is one of mildest amphoteric surfactants of its class, provides a moderate lather and cleans without removing dermal lipids from the skin to give a rich, conditioning effect. It is stable over a wide pH range and useful for institutional cleaners.     2clv

Learn more →

Cola®Teric 2CM

Disodium Cocoamphodipropionate

Cola®Teric 2CM, a plant derived alkyl imidazoline dicarboxylic acid amphoteric, displays multi-functional properties which include mild detergency, counter-irritancy, light conditioning, and lime soap dispersing. This product is ideal for use in shampoos, bath products, skin cleansers, and other mild personal care products. For industrial applications, Cola®Teric 2CM provides detergency, wetting, and hydrotroping attributes. This product is also compatible and stable in acids and concentrated electrolytes.

Learn more →

Cola®Teric 2CM-40CG

Disodium Cocoamphodipropionate

Cola®Teric 2CM-40CG is a salt-free, methanol-free amphoteric surfactant with mild characteristics useful in a variety of formulations. Cola®Teric 2CM-40CG is used to couple conditioning agents into cleaners such as shampoos and body washes, and provides high foam for body washes, baby shampoos and other mild personal care products. It also has the potential to reduce irritation in other surfactants used in the formulation.

Cola®Teric 2CM-40CG is also used in industrial cleaners to couple nonionic surfactants into high levels of electrolytes. Cola®Teric 2CM-40CG has broad pH range stability and ideal for systems where sodium chloride would harm the performance of the final product or present potential corrosion issues.

Learn more →

Cola®Teric 2COSF

Sodium Capryloamphopropionate

Cola®Teric 2-COSF is a caprylic imidazoline derived amphoteric surfactant that provides excellent wetting, detergency, rinsibility, and effective hydrotroping properties in a wide range of electrolyte systems. This low to moderate foaming amphoteric is ideally suited for use in household and industrial cleaners, alkaline degreasers, transportation cleaners, and textile/carpet care formulations.

Learn more →

Cola®Teric 810B

Mild, Low Foaming Surfactant for Cleanser Formulations

Cola®Teric 810B is a mild, low foaming surfactant for use in multiple household and industrial cleansing applications. Cola®Teric 810B offers very low surface tension, biodegradability, and enhanced cleaning properties. On treated hard surfaces, Cola®Teric 810B is moderately hydrophobic. Its drying ability may be modified by a water soluble ingredient and provide high gloss, antistatic qualities.

Learn more →

Cola®Teric AP

Hydrotroping Amphoteric for Alkaline and Acidic Systems

Cola®Teric AP is a salt-free organophosphate amphoteric that provides hydrotroping properties in high alkaline built systems that are formulated with conventional and capped low foaming nonionics. Cola®Teric AP improves the rinsibility of these systems by providing less streaking and redeposition of soil on the cleaned surface. Cola®Teric AP also enhances nonionics. Cola®Teric AP is suited for use in industrial cleaners, such as alkaline metal cleaning, high pressure spray cleaners, alkaline degreasers, scrubbing compounds, acid cleaners, transportation cleaners and various other hard surface cleaning formulations..

DETERGENCY ENHANCEMENT
In alkaline metal cleaning tests, Cola®Teric AP, when mixed at equal activity with all ethoxylated alcohols, provides dramatic improvement of hard surface cleaning properties. Blends containing Cola®Teric AP significantly outperformed blends containing similar concentrations of sodium xylene sulfonate.

HYDROTROPING PROPERTIES
Very low concentrations of Cola®Teric AP will help solubilize anionics and both high foaming and low foaming ethoxylated nonionics in high concentrations of acids and alkalies. Cola®Teric AP also improves the surface active properties such as wetting, penetrating and cleaning of formulations.

Learn more →

Cola®Teric AV

Acid Thickener

Cola®Teric AV is an an amphoteric acid thickener that effectively thickens HCl as well as acids, inorganic or organic, in the presence of chloride ions. As a surfactant, Cola®Teric AV also provides wetting and detergency properties in acid formulations. It offers viscosity building efficiency, ease of formulation and long-term viscosity stability. Cola®Teric AV is ideal for use in acid bowl cleaners, dairy cleaners and a variety of applications where viscous acid solutions are required.

For easiest results, add the Cola®Teric AV to the water and then add the acids. For acids that don’t contain chloride ions, sodium chloride can be added for effective thickening.

Learn more →

Cola®Teric BW

Octyl betaine

Cola®Teric BW is a low foam alkyl betaine effective in cleaning metals and stain prevention. The composition is free of silicates and suitable for soft metals such as copper, aluminum, or brass. Cola®Teric BW is used in producing highly built cleaners with good detergency and high cloud points.

Learn more →

Cola®Teric CA-35

Sodium Cocoamphopropionate

Cola®Teric CA-35 is a high foaming amphoteric surfactant that provides effective detergency, wetting, and hydrotroping properties in various electrolyte systems. It produces high foam and dense lather [Ross- Miles foam (0.1% aq.) 160mm – initial, 160mm – after 5 minutes].
Cola®Teric CA-35 is completely salt free and offers the formulator the opportunity of reacting Cola®Teric CA-35 with any acid or base he chooses to prepare the corresponding salt. This avoids the contamination of the product with unwanted inorganic salts.
Cola®Teric CA-35 offers excellent chemical stability, solubility and surface active properties, making this compound a valuable aid in formulating a wide range of cosmetic, household and industrial products.
The low irritation of Cola®Teric CA-35, along with its high foaming and dense foam properties, make this product ideal for shampoos, bubble baths and skin cleansers. Cola®Teric CA-35 is ideally suited for medium to high foam floor cleaners, metal cleaners and other high electrolyte detergents. Cola®Teric CA-35 is compatible with high electrolyte solutions and is stable in strong acid alkalis. Solutions of 10% CA-35 are stable in 25% NaOH and also in 10% H2SO4.

Learn more →

Cola®Teric CAPB

Disodium Capryloamphodiacetate

Cola®Teric CAPB is an amphoteric derived from caprylic imidazoline, and can be used in machine dishwashing and steam cleaning formulations while providing low foam. Cola®Teric CAPB will also find use in hard surface cleaning formulations because of its excellent wetting properties. Cola®Teric CAPB has excellent stability in strongly alkaline aacid systems. Cola®Teric CAPB is compatible with most anionic, cationic and non-ionic surfactants and is an excellent solubilizer for higher molecular weight surfactants.

Learn more →

Cola®Teric CB

High Foaming Surfactant for Cleanser Formulations

Cola®Teric CB is a coco-betaine made from a natural cocoamine source. Cola®Teric CB is functional in industrial and household formulations as well as personal care products. Cola®Teric CB is soluble in both acid and alkaline pH. This biodegradable, high foamer is an excellent choice for formulating “green” products.

Learn more →

Cola®Teric CBS

Standard Sultaine

Cocamidopropyl Hydroxysultaine. Cola®Teric CBS is an amphoteric surfactant in the sultaine class. Cola®Teric CBS exhibits outstanding surface activity, wetting, foaming, and compatibility in a wide variety of applications. Due to its amphoteric nature, ColaTeric CBS is compatible with cationic, anionic, and nonionic surfactants. The compatibility and stability of formulations containing Cola®Teric CBS are maintained over a broad pH range.

In industrial applications, Cola®Teric CBS is compatible and stable in systems containing acids, alkali, electrolytes and detergent builders. Cola®Teric CBS has excellent lime soap dispersing properties. Cola®Teric CBS is a mild detergent that will help stabilize foam and build viscosity.

Learn more →

Cola®Teric CBS-HP

Glycerin-Free Sultaine

Cocamidopropyl Hydroxysultaine – Glycerin Free​. Cola®Teric CBS-HP is a glycerin-free amphoteric surfactant in the sultaine class. Cola®Teric CBS-HP exhibits outstanding surface activity, wetting, foaming, and compatibility in a wide variety of applications. Due to its amphoteric nature, Cola®Teric CBS-HP is compatible with cationic, anionic, and nonionic surfactants. The compatibility and stability of formulations containing Cola®Teric CBS-HP are maintained over a broad pH range.

In industrial applications, Cola®Teric CBS-HP is compatible and stable in systems containing acids, alkali, electrolytes and detergent builders. Cola®Teric CBS-HP has excellent lime soap dispersing properties. Cola®Teric CBS-HP is a mild detergent that will help stabilize foam and build viscosity.

Cola®Teric CBS-HP is free of processing aids and preservatives, allowing greater formulator flexibility for all type of cleansing formulations. Cola®Teric CBS-HP also displays greater hydrotroping properties than Betaines to deliver extra clarity in household and personal care formulas.

COLA®TERIC SULTAINES ARE “GREENER”

More natural raw materials are used in the manufacture of Cola®Teric cocamidopropyl hydroxysultaine than other leading brands. For formulators interested in making their product more eco-friendly, Cola®Teric sultaines offer greener and more sustainable characteristics.

Learn more →

Cola®Teric CBS-HP MB

Glycerin-Free Sultaine Amphoteric | Mass Balance RSPO

Cola®Teric CBS-HP MB is a glycerin-free amphoteric surfactant in the sultaine class. Cola®Teric CBS-HP MB exhibits outstanding surface activity, wetting, foaming, and compatibility in a wide variety of applications. Due to its amphoteric nature, Cola®Teric CBS-HP MB is compatible with cationic, anionic, and nonionic surfactants. The compatibility and stability of formulations containing Cola®Teric CBS-HP MB are maintained over a broad pH range.

In industrial applications, Cola®Teric CBS-HP MB is compatible and stable in systems containing acids, alkali, electrolytes and detergent builders. Cola®Teric CBS-HP MB has excellent lime soap dispersing properties. Cola®Teric CBS-HP MB is a mild detergent that will help stabilize foam and build viscosity.

Cola®Teric CBS-HP MB is free of processing aids and preservatives, allowing greater formulator flexibility for all type of cleansing formulations. Cola®Teric CBS-HP MB also displays greater hydrotroping properties than Betaines to deliver extra clarity in household and personal care formulas.

MASS BALANCE RSPO
In keeping with Colonial Chemical’s commitment to sustainable raw material sourcing, this product is derived from palm oil that contributes to the production of certified sustainable palm oil. More information on www.RSPO.org.

COLA®TERIC SULTAINES ARE “GREENER”
More natural raw materials are used in the manufacture of Cola®Teric cocamidopropyl hydroxysultaine than other leading brands. For formulators interested in making their product more eco-friendly, Cola®Teric sultaines offer greener and more sustainable characteristics.

Learn more →

Cola®Teric CDS8

Caprylamidopropyl Hydroxypropyl Sultaine

Low Foam Hydroxysultaine Amphoteric Hydrotrope

Cola®Teric CDS8, with predominately biobased raw materials, is an excellent low foam sultaine amphoteric surfactant that exhibits outstanding hydrotroping efficiency, wetting, and good stability in alkaline, acidic, and high electrolyte formulations. It is a great replacement of low foam betaine and propionate amphoteric to avoid Prop 65 concern of dichloroacetic acid (DCA). Cola®Teric CDS8 is compatible with cationic, anionic, and nonionic surfactants. It finds wide applications in industrial and household cleaning including metal and parts, machinery, CIP, brewery, transportation, food processing and food services, automatic dishwashing, carpet and floor, and high efficiency laundry.

Learn more →

Cola®Teric COAB

Standard Betaine

This product is a high-foaming amphoteric surfactant useful in personal care and industrial applications. For industrial products, Cola®Teric COAB provides wetting, effective lime-soap dispersing, and viscosity building properties in various cleaner formulations. For personal care, it contributes mild cleansing and excellent viscosity building in anionic-based systems.

Learn more →

Cola®Teric COAB-45

High-foaming Amphoteric Surfactant

Cola®Teric COAB-45 is active cocamidopropyl betaine derived from triglyceride oil. This high active, mild amphoteric surfactant is used as a secondary surfactant, foam booster and viscosity builder in personal care products, hard surface cleaning, vehicle care and foaming specialties.

Learn more →

Cola®Teric CYAB

Caprylamidopropyl Betaine

Cola®Teric CYAB is a low foaming amphoteric with excellent coupling properties for industrial products. It provides good detergency in systems that require high cloud points and acts as an effective hydrotrope to couple nonionic surfactants into systems containing moderate amounts of electrolyte. This lower chain length betaine offers low foam at high and low pH ranges is useful for improved detergency.

Learn more →

Cola®Teric EHP

Sodium Alkyaminopropionate

Cola®Teric EHP is a low foaming hydrotropic detergent with good cleaning properties used in metal cleaning formulations. Cola®Teric EHP has excellent acid and alkaline stability properties and is compatible with anionic, cationics, and nonionics.

Learn more →

Cola®Teric HFA

Sodium Cocoiminodipropionate

Cola®Teric HFA is a high-foaming amphoteric surfactant that provides outstanding hydrotroping properties in high electrolyte systems. Additionally, Cola®Teric HFA contributes to wetting, detergency, and rinsibility. This high foaming amphoteric produces a stable, slow-draining, dense foam, and is ideally suited for use in household and industrial cleaners, mild personal care cleansers, and oilfield-related foamers.

Learn more →

Cola®Teric HLA

High-Foaming Amphoteric Surfactant

Cola®Teric HLA is a high-foaming amphoteric surfactant that provides outstanding hydrotroping properties in high electrolyte systems. Additionally, Cola®Teric HLA contributes to wetting, detergency, and rinsibility. This high foaming amphoteric produces a stable, slow-draining, dense foam, and is ideally suited for use in household and industrial cleaners and oilfield-related foamers.

NGO Certifications

  • Whole Foods Market® Eco-Scale™ ingredient

Learn more →

Cola®Teric JBS

Disodium Capryloamphodipropionate

Cola®Teric JBS is a low foaming amphoteric surfactant offering excellent wetting properties over a wide pH range. Cola®Teric JBS has excellent stability in strong acid and or alkaline systems. It is also an effective wetting agent for use in steam and high pressure spray applications where low foam is essential.

Learn more →

Cola®Teric JBS-50

Disodium Capryloamphodipropionate

Cola®Teric JBS-50 is a low foaming amphoteric surfactant at a higher concentration, offering excellent wetting properties over a wide pH range. Cola®Teric JBS-50 has excellent stability in strong acid and or alkaline systems. It is also an effective wetting agent for use in steam and high pressure spray applications where low foam is essential.

Learn more →

Cola®Teric JEM

Mixed C8 Ampho Carboxylate

Cola®Teric JEM, derived from mixed caprylic and ethylhexoic acids, is a surfactant with low foaming characteristics that is stable in alkaline medium. Cola®Teric JEM can be sprayed onto dry caustic soda, which will not discolor even after prolonged storage. Cola®Teric JEM is recommended for use in bottle washing compounds, wax stripping formulations, for alkaline degreasing (containing 12 to 18% caustic soda) and electrolytic degreasing.

Learn more →

Cola®Teric JSC

Sodium Capryloamphohydroxypropylsulfonate

Cola®Teric JSC is a biodegradable (100% biodegradable in 14 days), low-foam wetting agent and coupler useful in both high alkali and acid systems. It has a high tolerance for inorganic salts and is soluble in up to 35% caustic soda. Additionally, Cola®Teric JSC has excellent corrosion inhibition properties, making it useful in steel pickling baths and other acid systems.

Learn more →

Cola®Teric LAB70 UP

Amphoteric Surfactant

Cola®Teric LAB70 UP is a high-foaming amphoteric surfactant that is compatible with anionic, nonionic, cationic and other amphoteric surfactants. Cola®Teric LAB70 UP is based on a renewable vegetable lipid and is biodegradable. It is stable over a wide pH range and provides the formulator with a flexible ingredient for use in many personal care and industrial formulations.

Cola®Teric LAB70 UP contains no solvents or VOCs and is shipped unpreserved. Cola®Teric LAB70 UP exhibits a high viscosity build when used with traditional anionics. Cola®Teric LAB70 UP is useful in personal care products under both high and low pH conditions. It features exceptional mildness and exhibits modest conditioning action in hair shampoos, conditioner and skin cleansers.

Household cleaning formulations can benefit from the superior coupling performance for improved detergency, foam stabilizing and ingredient compatibility. At 10% active, Cola®Teric LAB70 UP exhibits very low toxicity, causes minimal eye irritation and is not considered a primary dermal irritant.

Learn more →

Cola®Teric LFM

Mixed Chain Length Low Foam Amphoteric

Cola®Teric LFM is a low foaming amphoteric surfactant that provides outstanding wetting properties in alkaline detergent formulations and effectively solubilizes conventional ethoxylated nonionics into a wide range of electrolyte systems. Additionally, ColaTeric LFM contributes to detergency and rinsibility. It is ideal for use in wax strippers, heavy-duty degreasers, and CIP cleaners.

Learn more →

Cola®Teric LHS

Fatty Alkyl Sultaine Amphoteric

Lauryl Hydroxysultaine​.

Cola®Teric LHS is a fatty alkyl amphoteric surfactant in the sultaine class. Cola®Teric LHS is a high foaming, biodegradable surfactant that is compatible with virtually all other surfactants. It demonstrates excellent stability in both extreme acid and alkaline formulations and very stable in both acid and alkali formulations and can be solubilized at 2-3% in 30- 40% caustic soda solutions. Cola®Teric LHS is a unique foaming surfactant successfully used in sulfate-free and PEG-free formulations in industrial, household and hair & body care applications.

Cola®Teric LHS is “Derived Natural” with a Natural Origin Index of 0.87 in accordance with ISO 16128 guideline.

Learn more →

Cola®Teric LMB

High-foaming Amphoteric Surfactant

Cola®Teric LMB is a high foaming amphoteric surfactant that displays higher foaming and viscosity building properties versus traditional cocamidopropyl betaines in shampoos, skin cleansers, and other mild personal care products. Cola®Teric LMB is stable over a wide pH range and is compatible with anionic, nonionic and cationic surfactants. Cola®Teric LMB foams well in high electrolyte solutions. In cosmetic formulations, Cola®Teric LMB shows a marked increase in viscosity along with increased flash foam when formulated with anionic surfactants. It is also valuable in bubble bath formulations where mildness, lime soap dispersing properties, and viscosity building characteristics are necessary.

Learn more →

Cola®Teric MSC-NA

Mixed Short Chain Dipropionate

Cola®Teric MSC-NA is a low foaming, biodegradable, amphoteric surfactant with excellent detergency, designed for use in either low or high temperature alkaline and acid cleaners. While some foaming occurs in both alkaline and acid cleaners when used in spray tanks, it is fast breaking and does not accumulate.

Cola®Teric MSC-NA is a neutralized, 50% active, liquid material that is suited for use in products containing high percentages of caustic, such as heavy duty industrial cleaners. In contrast to low foaming nonionic surfactants, Cola®Teric MSC-NA exhibits low foaming properties even at low temperatures while still maintaining good detergent properties.

Cola®Teric MSC-NA can be incorporated directly into aqueous alkaline systems.

Learn more →

Cola®Teric SC

High-Foaming Surfactant and Hydrotrope

Cola®Teric SC is a biodegradable amphoteric surfactant for cleaning applications at both high and low pH. This high-foaming hydrotrope provides superior cleaning performance over a majority of amphoteric surfactants. In addition to industrial and institutional cleaning, the mildness of Cola®Teric SC makes it a good fit for household and personal care applications.

Learn more →

Cola®Teric SLAA

Sodium Lauroamphoacetate

Cola®Teric SLAA is a mild surfactant designed for use in personal care applications. Compatible with anionic and cationic surfactants, Cola®Teric SLAA is suggested for shampoos, bubble baths, bath gels and body washes. Cola®Teric SLAA will increase foam, mildness and viscosity in most anionic/amphoteric formulations.

Learn more →

Cola®Teric STA

Sodium Stearoamphoacetate

Cola®Teric STA is an amphoteric surfactant that is useful in personal care products as a viscosity builder in cosmetics, a hair conditioning agent and a foam booster. Cola®Teric STA also features antistatic and softening effects on animal, cellulose and synthetic fabrics in household cleaners. Cola®Teric STA is used in polishes as an emulsifier and as a dispersant and viscosity builder in a variety of household and industrial products. It is non-yellowing.

Learn more →

Cola®Teric ZF-50

Octyl Iminodipropionate

Cola®Teric ZF-50 is an extremely versatile, non-foaming amphoteric surfactant that provides excellent hydrotroping properties over a wide range of electrolyte concentrations. It effectively couples conventional and capped low foaming nonionics into heavy duty built alkaline cleaner formulations. Cola®Teric ZF-50 can be used in mixed anionic/nonionic systems to control the Krafft point and cloud point. Cola®Teric ZF-50 is ideally suited for use in household and industrial detergent cleaners such as bottle washing, high pressure spray cleaners, alkaline degreasers, scrubbing compounds, acid cleaners, transportation cleaners and various other hard surface detergent formulations.

Learn more →

Cola®Trope 1254

Anionic, Bleach Stable, Hydrotrope

Cola®Trope 1254 is an anionic hydrotroping agent designed to maximize the benefits in all systems. It can be used to replace phosphate esters in moderately alkaline systems to eliminate phosphorus release. As a free flowing liquid at an alkaline pH, it can easily be added to existing systems to improve foaming action and help solubilize nonionics. It will also help suppress Krafft points in blends with high levels of inorganic builders and provide some wetting action on hard surfaces.

Learn more →

Cola®Trope 522

Low Foam, High Caustic Hydrotrope

Cola®Trope 522 is an alkaline stable surfactant that is soluble and stable in 35% sodium hydroxide and high levels of other alkaline builders. This surfactant is used to formulate alkaline detergents for use in metal cleaning, food plant cleaning, and transportation cleaning. Cola®Trope 522 is useful at an application temperature of greater than 140ºF in 35% sodium hydroxide, 20% sodium metalsilicate, 45% KOH and 45% TKPP individually.

Learn more →

Cola®Trope 555

Low Foaming Hydrotrope Soluble in 35% Caustic

Cola®Trope 555 is an alkaline stable surfactant designed for formulating low foaming, liquid cleaner concentrates containing comparatively high levels of caustic and/or other alkaline compounds. Cola®Trope 555 exhibits optimum detergency and low foaming properties at low application temperatures (<60C).

Learn more →

Cola®Trope AHS

Alkylether Hydroxypropyl Sultaine

Unlike some conventional surfactants used in 50% Caustic Soda solutions, Cola®Trope AHS is readily soluble and requires no prolonged mixing or heating. It is also stable in mineral acids (i.e., 25% HCl, 20% HNO3, and 85% H3PO4).

Suggested uses are in the area of industrial and household products where high performance and low foam are required. Metal cleaning, bottle washing concentrates, heavy duty steam cleaning, wax striping, etc., are only a few of the areas where Cola®Trope AHS deserves evaluation.

Tests show that 1.5% of Cola®Trope AHS in a 50% Sodium Hydroxide solution yields a surface tension of 35.8 dynes/cm. A solution of 0.3% ColaTrope AHS in 10% Sodium Hydroxide has a surface tension of 25 dynes/cm.

Prolonged boiling of 0.3%;Cola®Trope AHS;in a 10% Caustic Soda solution showed no loss of effectiveness in lowering surface tension.

In addition to being an effective wetting agent and detergent in Caustic Soda solutions, Cola®Trope AHS at 1.0% in HCl and at 10% in Nitric Acid solutions lowers the surface tension to below 30 dynes/cm.

Learn more →

Cola®Trope CA

Environmentally Safe, Low-Foam, Naturally Derived Hydrotrope

Cola®Trope CA is a highly effective hydrotrope with excellent environmental attributes. Many hydrotropes currently on the market are made from environmentally unfriendly materials. For the formulator who is formulating safer, “green” products, hydrotropes such as SXS and cresylic acid based hydrotropes are no longer safe and environmentally acceptable.

Cola®Trope CA is derived from natural sources and are non-petroleum based materials and more effective than sodium xylene sulfonate. It has excellent wetting and detergency properties and soluble in up to 20% KOH and 15% NaOH.

Cola®Trope CA is virtually non-foaming making it suitable for spray applications. It is recommended for neutral to alkaline pH formulations and not to be used in acid pH formulations.

Learn more →

Cola®Trope INC

Sodium Alkanoate, Bleach Stable Hydrotrope

Cola®Trope INC is a versatile, low foaming anionic surfactant/hydrotrope and designed for the use of coupling nonionics and other surfactants into products where high levels of electrolytes may be present. It is especially effective in formulating alkaline built liquid detergent concentrates. This product is not generally intended for low pH systems.

When compared to Sodium Xylene Sulfonate, a popular product used in built liquid detergent systems, there are a number of reasons for considering Cola®Trope INC as a more viable alternative for formulations.

Cola®Trope INC has been tested according to Method OECD 301D and determined to be inherently biodegradable.

Learn more →

Cola®Trope INC-K

Potassium Alkanate, Bleach Stable, Hydrotrope

Cola®Trope INC-K has been developed for use in systems with high electrolytes. Similar to our Cola®Trope INC, it is used to couple nonionics and other surfactants into highly built products. Cola®Trope INC-K is a very versatile, low foaming surfactant and hydrotrope in one molecule. Cola®Trope INC-K is the potassium salt alternative to our Cola®Trope INC product. It is useful in formulations where the sodium salt ion needs to be avoided. In addition, Cola®Trope INC-K has a lower Krafft point than Cola®Trope INC.

Like Cola®Trope INC, Cola®Trope INC-K is a stand-alone surfactant and as such will contribute to the surface activity, wetting and/or detergency properties of your formulated product.

Cola®Trope INC-K has excellent stability in hypochlorite solutions and does not contribute to the degradation of the hypochlorite in the formulation.

Learn more →

Cola®Trope OD

Environmentally Safe, Naturally Derived Hydrotrope

Cola®Trope OD is a highly effective hydrotropes with excellent environmental attributes. Many hydrotropes currently on the market today are made from environmentally unfriendly materials. For the formulator who is formulating safer, “green” products, hydrotropes such as SXS and cresylic acid based hydrotropes are no longer safe and environmentally acceptable.

Cola®Trope OD is derived from natural sources and are non-petroleum based materials. Cola®Trope OD is more effective than sodium xylene sulfonate and has excellent wetting and detergency properties and soluble in up to 20% KOH and 15% NaOH.

Cola®Trope OD is a moderate foamer that is useful in developing vertical foaming cleaners. It is recommended for neutral to alkaline pH formulations and not to be used in acid pH formulations.

Cola®Trope OD is listed on CleanGredients.

Learn more →

Cola®Wet DOSS 70E

Sulfosuccinate Surfactant

Cola®Wet surfactants are chemically classified as dialkyl sulfosuccinates. These anionic surfactants provide a wide variety of functional properties that include surface and interfacial tension reduction, wetting, dispersing, emulsifying, penetrating, and solubilizing. Cola®Wet products are suitable for use in a broad range of applications such as wetting agents, detergents, agricultural, mining and textile products, as well as, emulsifiers/dispersants in water treatment, paint, ink and polymerization formulations.

Chemical Stability in Acid and Alkaline Systems
Cola®Wet products are stable in neutral hot and cold aqueous solutions, as well as, in systems in the pH range of 5-9. In systems outside this range, they are subject to hydrolysis. Their rates of hydrolysis increase rapidly in highly acidic and alkaline systems and accelerate when accompanied by elevations in temperature. In certain applications, hydrolysis can be used advantageously to prevent re-wetting after initial wetting has been accomplished.

Solvent System: 19% Water, 11% Ethanol

Learn more →

Cola®Wet DOSS 70PG

Sulfosuccinate Surfactant

Cola®Wet surfactants, chemically classified as dialkyl sulfosuccinates, are anionic surfactants that provide a wide variety of functional properties that include surface and interfacial tension reduction, wetting, dispersing, emulsifying, penetrating, and solubilizing.

Cola®Wet surfactants are suitable for use in a broad range of applications such as wetting agents, in cosmetics, detergents, agricultural, mining and textile products, as well as emulsifiers/dispersants in water treatment, paint, ink and polymerization formulations.

DOSS-70PG Solvent System

15% Water
15% Propylene Glycol

Learn more →

Cola®Wet DOSS 75

Sulfosuccinate Surfactant

Cola®Wet sulfosuccinates, chemically classified as dialkyl sulfosuccinates, are anionic surfactants that provide a wide variety of functional properties that include surface and interfacial tension reduction, wetting, dispersing, emulsifying, penetrating, and solubilizing.

Cola®Wet sulfosuccinates are suitable for use in a broad range of applications such as wetting agents, in cosmetics, detergents, agricultural, mining and textile products, as well as emulsifiers/dispersants in water treatment, paint, ink and polymerization formulations.

DOSS-75 Solvent System

18% Water
7% Ethanol

Learn more →

Cola®Wet MA-80

Sodium Dihexyl Sulfosuccinate & IPA

Cola®Wet sulfosuccinates, chemically classified as dialkyl sulfosuccinates, are anionic surfactants that provide a wide variety of functional properties that include surface and interfacial tension reduction, wetting, dispersing, emulsifying, penetrating, and solubilizing.

Cola®Wets are suitable for use in a broad range of applications such as wetting agents, in cosmetics, detergents, agricultural, mining and textile products, as well as emulsifiers/dispersants in water treatment, paint, ink and polymerization formulations.

Cola®Wet MA-80 surfactant is an anionic surface tension depressant and an emulsifying, dispersing and solubilizing agent exhibiting high electrolyte tolerance. It promotes penetration and spreading of organic liquids as films.

Molecular Formula: C16H29O7NaS
Molecular Weight: 388
EPA Status: Exempt 40 CFR 180.1001 (d)
FDA Status: Approved 21 CFR 178.3400

EPA STATUS

Under the provisions of Section 180.1001 (d) of the Pesticides Chemicals Regulations, Cola®Wet MA-80 surfactant is exempted from the requirement of a tolerance when used in accordance with good agricultural practice as an inert ingredient of pesticide formulations applied to growing crops.

FDA STATUS

Cola®Wet MA-80 surfactant is permitted under 21 CFR 178.3400 of the Food Additives Regulations for use as an emulsifier and/or surface active agent in the manufacture of any non-food article intended for food-contact use. There are no limitations on the nature or amount of use of Cola®Wet MA-80 surfactant other than the general limitations set forth in Section 174.5 which are applicable to every substance listed in Subpart D.

MA-80 Solvent System

15% Water
5% Isopropanol

Learn more →

Cola®Wet TDS-35

Tetrasodium Dicarboxyethyl Stearyl Sulfosuccinamate

Cola®Wet TDS-35, chemically described as tetrasodium dicarboxyethyl stearyl sulfosuccinamate, is an anionic surfactant displaying a wide array of functional properties. This versatility makes it ideal for use in industrial detergents, agricultural, cosmetic, and textile products, as well as in emulsion polymerization of vinyl monomers.

PERFORMANCE DATA
Alkaline Stability
Cola®Wet TDS-35 demonstrates outstanding stability in high electrolyte salt solutions. 1% active (by wt.) of Cola®Wet TDS-35 is soluble and stable in up to 35% active solutions of NaOH or KOH at room temperature. (Solutions remain clear for 3 hours @ 180°F)

SOLUBILIZING PROPERTIES
Cola®Wet TDS-35 can effectively stabilize emulsions containing high concentrations of inorganic salts. Its potent solubilizing properties can be used to increase the tolerance of soaps, sulfonated oils, and other surface active agents to alkalies, inorganic salts and acids.

Cola®Wet TDS-35 has modest wetting properties at room temperature which improve dramatically at elevated temperatures. This behavior makes Cola®Wet TDS-35 particularly useful in hot systems, such as steam cleaners and extraction carpet care cleaners.

Learn more →

Cola®Zoline 1210

Mixed Short Chain Alkyl Imidazoline

Cola®Zolines, chemically described as 1–hydroxyethyl 2–alkyl imidazolines, are classified as cationic surface active agents. Cola®Zolines and their acid salts offer the following functional properties: wetting, emulsifying, detergency, thickening, moisture displacing, corrosion inhibiting, and antistatic effects. These functional properties are useful in agricultural emulsions, industrial cleaners, paints/coatings, plastics, and petroleum applications.

CHEMICAL PROPERTIES
Cola®Zolines are readily soluble in polar solvents and in hydrocarbons; however they are relatively insoluble in water. The acid salts of Cola®Zolines with low molecular weight acids (acetic, hydrochloric, or phosphoric acid) are water-soluble. Oil soluble salts can be formed by neutralization with long chain fatty acids, naphthenic acids, and alkyl or aryl sulfonic acids.

Learn more →

Cola®Zoline C

C8-C18 Alkyl Imidazoline

Cola®Zolines, chemically described as 1–hydroxyethyl 2–alkyl imidazolines, are classified as cationic surface active agents. Cola®Zolines and their acid salts offer the following functional properties: wetting, emulsifying, detergency, thickening, moisture displacing, corrosion inhibiting, and antistatic effects. These functional properties are useful in agricultural emulsions, industrial cleaners, paints/coatings, plastics, and petroleum applications.

CHEMICAL PROPERTIES
Cola®Zolines are readily soluble in polar solvents and in hydrocarbons; however they are relatively insoluble in water. The acid salts of Cola®Zolines with low molecular weight acids (acetic, hydrochloric, or phosphoric acid) are water-soluble. Oil soluble salts can be formed by neutralization with long chain fatty acids, naphthenic acids, and alkyl or aryl sulfonic acids.

Learn more →

Cola®Zoline LM

Lauric Myrystic Imidazoline

Cola®Zolines, chemically described as 1–hydroxyethyl 2–alkyl imidazolines, are classified as cationic surface active agents. ColaZolines and their acid salts offer the following functional properties: wetting, emulsifying, detergency, thickening, moisture displacing, corrosion inhibiting, and antistatic effects. These functional properties are useful in agricultural emulsions, industrial cleaners, paints/coatings, plastics, and petroleum applications.

CHEMICAL PROPERTIES
ColaZolines are readily soluble in polar solvents and in hydrocarbons; however they are relatively insoluble in water. The acid salts of ColaZolines with low molecular weight acids (acetic, hydrochloric, or phosphoric acid) are water-soluble. Oil soluble salts can be formed by neutralization with long chain fatty acids, naphthenic acids, and alkyl or aryl sulfonic acids.

Learn more →

Cola®Zoline O

Oleic Alkyl Imidazoline

Cola®Zolines, chemically described as 1–hydroxyethyl 2–alkyl imidazolines, are classified as cationic surface active agents. Cola®Zolines and their acid salts offer the following functional properties: wetting, emulsifying, detergency, thickening, moisture displacing, corrosion inhibiting, and antistatic effects. These functional properties are useful in agricultural emulsions, industrial cleaners, paints/coatings, plastics, and petroleum applications.

CHEMICAL PROPERTIES
Cola®Zolines are readily soluble in polar solvents and in hydrocarbons; however they are relatively insoluble in water. The acid salts of Cola®Zolines with low molecular weight acids (acetic, hydrochloric, or phosphoric acid) are water-soluble. Oil soluble salts can be formed by neutralization with long chain fatty acids, naphthenic acids, and alkyl or aryl sulfonic acids.

Learn more →

Cola®Zoline T

Tall Oil Alkyl Imidazoline

Cola®Zolines, chemically described as 1–hydroxyethyl 2–alkyl imidazolines, are classified as cationic surface active agents. Cola®Zolines and their acid salts offer the following functional properties: wetting, emulsifying, detergency, thickening, moisture displacing, corrosion inhibiting, and antistatic effects. These functional properties are useful in agricultural emulsions, industrial cleaners, paints/coatings, plastics, and petroleum applications.

CHEMICAL PROPERTIES
Cola®Zolines are readily soluble in polar solvents and in hydrocarbons; however they are relatively insoluble in water. The acid salts of Cola®Zolines with low molecular weight acids (acetic, hydrochloric, or phosphoric acid) are water-soluble. Oil soluble salts can be formed by neutralization with long chain fatty acids, naphthenic acids, and alkyl or aryl sulfonic acids.

Learn more →

Colonial AOS-40

Sodium C14-16 Olefin Sulfonate

Colonial AOS-40 is a pale yellow to light amber aqueous solution of sodium C14-16 alpha olefin sulfonate. Colonial AOS-40 combines the advantages of high foaming power, good emulsification, mildness to the skin, and excellent lime soap dispersion to give the formulator maximum flexibility in the preparation of light and heavy-duty cleaners. It is also suitable for use in acidic formulations such as those containing alpha hydroxyl acids or salicylic acid.
Colonial AOS-40 is perfect for sulfate-free personal care and detergent products.

Learn more →

Colonial AOS-40 UP

Sodium C14-16 Olefin Sulfonate (Unpreserved)

Colonial AOS-40 UP is a pale yellow to light amber aqueous solution of sodium C14-16 alpha olefin sulfonate. Colonial AOS-40 UP combines the advantages of high foaming power, good emulsification, mildness to the skin, and excellent lime soap dispersion to give the formulator maximum flexibility in the preparation of light and heavy-duty cleaners. It is also suitable for use in acidic formulations such as those containing alpha hydroxyl acids or salicylic acid.

Colonial AOS-40 UP is perfect for sulfate-free personal care and detergent products.

This grade of AOS is self-preserved by higher pH.

Learn more →

Colonial DF-16

Low Foam Wetting Agent

Technical Name:  Alcohols, C8-C10, ethoxylated propoxylated

Learn more →

Colonial SCS Needles

Naturally-derived Anionic Surfactant in Needle Form

Colonial SCS Needles is a sodium coco-sulfate derived from 100% natural coconut oil. In the needle form, the product is free flowing and disperses easily in water. Heat is required to fully dissolve the product. Colonial SCS Needles provides excellent lather, thickening and conditioning properties. It is also an excellent replacement for most anionic surfactants in personal cleansing products.

  • Readily biodegradable per OECD 301 methods.
  • This product meets the criteria for a surfactant under the EU Detergents Regulation (EC) 648/2004.
  • Colonial SCS Needles is “Derived Natural” with a Natural Origin Index of 1.00 in accordance with ISO 16128 guideline.
  • ECOCERT Approved Raw Material

Learn more →

Colonial SDS-40

Sodium Decyl Sulfate

Colonial SDS-40 is a sodium decyl sulfate for use in a variety of industries including industrial, institutional cleaning industry, fire fighting foams, and emulsion polymers.

Colonial SDS-40 acts as a dispersing wetting agent and emulsifier.

Learn more →

Colonial SLES-2

Sodium Laureth Sulfate

Colonial SLES-2 is a sodium salt of lauryl alcohol ethoxy sulfate containing an average of 2 moles of ethylene oxide. It is a light liquid of medium viscosity, sparkling clarity and mild odor. Colonial SLES-2 is biodegradable.

Learn more →

Colonial SLS

High-Foaming Anionic Surfactant

Colonial SLS is widely used as a surfactant in personal care, cosmetics, and cleaning products. It is a highly effective anionic surfactant used to remove oily stains and residues by wetting surfaces, emulsifying or solubilizing oils, and suspending soil so that they can be rinsed away. Colonial SLS contributes rich foaming properties to personal care products.

Learn more →

Colonial SOS

Sodium Octyl Sulfate

Colonial SOS is a highly biodegradable wetting agent that is stable under varying conditions of pH and temperature. The rapid wetting and low foam characteristics of Colonial SOS recommend it for applications listed below.

Learn more →

Colonial ZF-10

Low Foaming Concentrate for 10% Caustic

Colonial ZF-10 is a low foaming concentrate for up to 10% caustic. It is a surfactant product made to be easily soluble in concentrated alkaline solutions at room temperature but exhibit low foaming nonionic behavior at elevated temperatures after dilution to end use concentrations. Colonial ZF-10 is designed to provide superior detergency characteristics in the presence of strong electrolytes used in soak tanks, sprays, pipeline cleaners, and low-foaming scrubbers.

Colonial ZF-10 contains sodium ions, an alternative to Colonial ZF-10P that contains potassium ion instead.

Learn more →

Colonial ZF-15

Low Foaming Concentrate for 15% Caustic

Colonial ZF-15 is a low foaming concentrate for up to 15% caustic. It is a surfactant product made to be easily soluble in concentrated alkaline solutions at room temperature but exhibit low foaming nonionic behavior at elevated temperatures after dilution to end use concentrations. Colonial ZF-15 is designed to provide superior detergency characteristics in the presence of strong electrolytes used in soak tanks, sprays, pipeline cleaners, and low-foaming scrubbers.

Learn more →

Colonial ZF-25

Low Foaming Concentrate for 25% Caustic

Colonial ZF-25 is a low foaming concentrate for up to 25% caustic. It is a surfactant product made to be easily soluble in concentrated alkaline solutions at room temperature but exhibit low foaming nonionic behavior at elevated temperatures after dilution to end use concentrations. Colonial ZF-25 is designed to provide superior detergency characteristics in the presence of strong electrolytes used in soak tanks, sprays, pipeline cleaners, and low-foaming scrubbers.

Learn more →

Poly Suga®Mulse D6

Sorbitan Oleate Decylglucoside Crosspolymer (HLB 8-10)

Poly Suga®Mulse D6 is a PEG-free, nonionic emulsifier made from 100% bio-based raw materials. It is mostly hydrophilic, dispersible in water, and soluble in varying degrees in organic liquids. Poly Suga®Mulse D6 is used for oil-in-water (O/W) emulsification and dispersion of fragrances and all types of oils. It is compatible with nonionic, cationic and anionic ingredients and is effective in systems with relatively high levels of electrolyte, acid, or base. Poly Suga®Mulse D6 may also be used as a primary or co-emulsifier in the formulation of creams and lotions. Poly Suga®Mulse D6 is a clear yellow liquid with a mild odor.

Learn more →

Poly Suga®Mulse D6 MB

100% Bio-based Emulsifier | Mass Balance RSPO

Poly Suga®Mulse D6 MB is a PEG-free, nonionic emulsifier made from 100% bio-based raw materials. It is mostly hydrophilic, dispersible in water, and soluble in varying degrees in organic liquids. Poly Suga®Mulse D6 MB is used for oil-in-water (O/W) emulsification and dispersion of fragrances and all types of oils. It is compatible with nonionic, cationic and anionic ingredients and is effective in systems with relatively high levels of electrolyte, acid, or base. Poly Suga®Mulse D6 MB may also be used as a primary or co-emulsifier in the formulation of creams and lotions. Poly Suga®Mulse D6 MB is a clear yellow liquid with a mild odor.

MASS BALANCE RSPO
In keeping with Colonial Chemical’s commitment to sustainable raw material sourcing, this product is derived from palm oil that contributes to the production of certified sustainable palm oil. More information on www.RSPO.org.

Poly Suga®Mulse D6 MB is “Derived Natural” with a Natural Origin Index of 1 in accordance with ISO 16128 guideline.

Learn more →

Poly Suga®Mulse D9

Sorbitan Oleate Decylglucoside Crosspolymer (HLB 12-14)

Poly Suga®Mulse D9 is a PEG-free, nonionic fragrance solubilizer made from 100% biobased raw materials. It is hydrophilic, freely soluble or dispersible in water, and soluble in varying degrees in organic liquids. Poly Suga®Mulse D9 is used for oil-in-water (O/W) emulsification, dispersion or solubilization of fragrances and all types of oils. It is compatible with nonionic, cationic and anionic surfactants and is effective in systems with relatively high levels of electrolyte, acid, or base. Poly Suga®Mulse D9 is an excellent solubilizer for fragrances in water-only and water-and-surfactant systems. Poly Suga®Mulse D9 compares favorably to ethoxylated materials (such as Tween® 20 and PEG-40 hydrogenated castor oil) in both ease-of-use and use levels. Poly Suga®Mulse D9 may also be used as a co-emulsifier in the formulation of creams and lotions.

NGO Certifications

  • ECOCERT Approved Raw Material
  • Conforms to NSF/ANSI 305-2012
  • USDA Biopreferred Product
  • Natural Products Association Certified Ingredient

 


 

The Safer Choice Program of the U.S. Environmental Protection Agency certified Poly Suga®Mulse D9 as Acceptable for use in Safer Choice-certified products and for listing on CleanGredients as a surfactant.

Poly Suga®Mulse D9 also meets criteria for direct release under EPA’s Safer Choice Standard and the use limit for this ingredient no longer applies.

  • Direct release products are approved in outdoor applications that are likely to bypass sewage treatment . Products include home car washes, cleaners for use in power washers, boat cleaners, drilling muds, graffiti removers, fleet disinfectants, window cleaners, and the like.

Poly Suga®Mulse D9 is stable in hydrogen peroxide.

Learn more →

Poly Suga®Mulse D9 MB

100% Biobased Fragrance Solubilizer | Mass Balance RSPO

Poly Suga®Mulse D9 MB is a PEG-free, nonionic fragrance solubilizer made from 100% biobased raw materials. It is hydrophilic, freely soluble or dispersible in water, and soluble in varying degrees in organic liquids. Poly Suga®Mulse D9 MB is used for oil-in-water (O/W) emulsification, dispersion or solubilization of fragrances and all types of oils. It is compatible with nonionic, cationic and anionic surfactants and is effective in systems with relatively high levels of electrolyte, acid, or base.

Poly Suga®Mulse D9 MB is an excellent solubilizer for fragrances in water-only and water-and-surfactant systems. Poly Suga®Mulse D9 MB compares favorably to ethoxylated materials (such as Tween® 20 and PEG-40 hydrogenated castor oil) in both ease-of-use and use levels. Poly Suga®Mulse D9 MB may also be used as a co-emulsifier in the formulation of creams and lotions.

NGO Certifications

  • ECOCERT Approved Raw Material
  • Conforms to NSF/ANSI 305-2012
  • USDA Biopreferred Product
  • Natural Products Association Certified Ingredient

The Safer Choice Program of the U.S. Environmental Protection Agency certified Poly Suga®Mulse D9 MB as Acceptable for use in Safer Choice-certified products and for listing on CleanGredients as a surfactant.

Poly Suga®Mulse D9 MB also meets criteria for direct release under EPA’s Safer Choice Standard and the use limit for this ingredient no longer applies.

  • Direct release products are approved in outdoor applications that are likely to bypass sewage treatment . Products include home car washes, cleaners for use in power washers, boat cleaners, drilling muds, graffiti removers, fleet disinfectants, window cleaners, and the like.

Poly Suga®Mulse D9 MB is stable in hydrogen peroxide.

MASS BALANCE RSPO
In keeping with Colonial Chemical’s commitment to sustainable raw material sourcing, this product is derived from palm oil that contributes to the production of certified sustainable palm oil. More information on www.RSPO.org.

Poly Suga®Mulse D9 MB is “Derived Natural” with a Natural Origin Index of 1 in accordance with ISO 16128 guideline.

 

Learn more →

Suga®Fax D04

Sodium Butylglucosides Hydroxypropyl Phosphate

Colonial Chemical has pioneered a new series of “Green Gemini Surfactants” products based upon derivatized alkyl polyglucosides. The Colonial Suga®Fax Series of surfactants represent the first new technology in the manufacture of safe, naturally derived green surfactants that are not petroleum based and come from renewable resources.

Traditional NPE and alcohol ethoxylates have been the work horse products in consumer and industrial formulations for many years. Those products provide detergency, wetting and limited hydrotroping properties to formulators. The new Suga®Fax “Gemini Surfactants” offer formulating advantages over traditional surfactant choices, such as increased hydrotroping properties, superior detergency and wetting. And unlike traditional surfactants, Suga®Fax products are soluble and stable under low and high pH conditions, as well as being safe for the environment.

The Suga®Fax materials are derived from alkyl polyglucosides, a renewable resource made from coconut oil and corn syrup. These starting materials provide biodegradable, mild surfactants that can function in extreme conditions for a variety of consumer and industrial applications. Because of their safety, Suga®Fax products are excellent in consumer and industrial products, dramatically lowering the risk to human exposure.

Suga®Fax surfactants are recommended wherever wetting, hydrotroping, and detergency are needed in a consumer or industrial product.

Learn more →

Suga®Fax D08

Sodium Hexylglucosides Hydroxypropyl Phosphate

Colonial Chemical has pioneered a new series of “Green Gemini Surfactants” products based upon derivatized alkyl polyglucosides. The Colonial Suga®Fax Series of surfactants represent the first new technology in the manufacture of safe, naturally derived green surfactants that are not petroleum based and come from renewable resources.

Traditional NPE and alcohol ethoxylates have been the work horse products in consumer and industrial formulations for many years. Those products provide detergency, wetting and limited hydrotroping properties to formulators. The new Suga®Fax “Gemini Surfactants” offer formulating advantages over traditional surfactant choices, such as increased hydrotroping properties, superior detergency and wetting. And unlike traditional surfactants, Suga®Fax products are soluble and stable under low and high pH conditions, as well as being safe for the environment.

The Suga®Fax materials are derived from alkyl polyglucosides, a renewable resource made from coconut oil and corn syrup. These starting materials provide biodegradable, mild surfactants that can function in extreme conditions for a variety of consumer and industrial applications. Because of their safety, Suga®Fax products are excellent in consumer and industrial products, dramatically lowering the risk to human exposure.

Suga®Fax surfactants are recommended wherever wetting, hydrotroping, and detergency are needed in a consumer or industrial product.

Learn more →

Suga®Fax D10NC

Sodium Decylglucosides Hydroxypropyl Phosphate

Suga®Fax D10NC is an ideal starting point for formulators of high-performance industrial cleaners, household cleaners and oilfield cleaners that also feature greener, milder and safer properties. This 100% naturally-derived, mild surfactant has broad regulatory approvals, very mild characteristics for human contact and safe for release in the environment, all while being an effective detergent and hydrotrope.

Suga®Fax D10NC is a 100% biobased material as designated by USDA testing protocol. Suga®Fax D10NC is also readily biodegradable (OECD 301B) and presents no damage to aquatic life. The mild properties of Suga®Fax D10NC in eyes and on skin make it very useful in cleaners where human contact may occur with the cleaning product.

Suga®Fax D10NC is stable at all pH ranges for extended periods while providing immediate wetting in water. Suga®Fax D10NC can lower the surface tension of 50% and 25% caustic as well as other builder systems, enabling the builder to fully perform in the formulation.

Suga®Fax D10NC may be used in household cleaners for hard surface cleaning, oven cleaning, and in extreme clean-up products for pots and pans. It is also suitable for high-performance cleaners in heavy duty industrial applications.

Suga®Fax D10NC is stable in hydrogen peroxide.

Learn more →

Suga®Fax D12

Sodium Laurylglucosides Hydroxypropyl Phosphate

Colonial Chemical has pioneered a new series of “Green Gemini Surfactants” products based upon derivatized alkyl polyglucosides. The Colonial Suga®Fax Series of surfactants represent the first new technology in the manufacture of safe, naturally derived green surfactants that are not petroleum based and come from renewable resources.

Traditional NPE and alcohol ethoxylates have been the work horse products in consumer and industrial formulations for many years. Those products provide detergency, wetting and limited hydrotroping properties to formulators. The new Suga®Fax “Gemini Surfactants” offer formulating advantages over traditional surfactant choices, such as increased hydrotroping properties, superior detergency and wetting. And unlike traditional surfactants, Suga®Fax products are soluble and stable under low and high pH conditions, as well as being safe for the environment.

The Suga®Fax materials are derived from alkyl polyglucosides, a renewable resource made from coconut oil and corn syrup. These starting materials provide biodegradable, mild surfactants that can function in extreme conditions for a variety of consumer and industrial applications. Because of their safety, Suga®Fax products are excellent in consumer and industrial products, dramatically lowering the risk to human exposure.

Suga®Fax surfactants are recommended wherever wetting, hydrotroping, and detergency are needed in a consumer or industrial product.

Learn more →

Suga®Fax D86

Sodium Cocoglucosides Hydroxypropyl Phosphate

Colonial Chemical has pioneered a new series of “Green Gemini Surfactants” products based upon derivatized alkyl polyglucosides. The Colonial Suga®Fax Series of surfactants represent the first new technology in the manufacture of safe, naturally derived green surfactants that are not petroleum based and come from renewable resources.

Traditional NPE and alcohol ethoxylates have been the work horse products in consumer and industrial formulations for many years. Those products provide detergency, wetting and limited hydrotroping properties to formulators. The new Suga®Fax “Gemini Surfactants” offer formulating advantages over traditional surfactant choices, such as increased hydrotroping properties, superior detergency and wetting. And unlike traditional surfactants, Suga®Fax products are soluble and stable under low and high pH conditions, as well as being safe for the environment.

The Suga®Fax materials are derived from alkyl polyglucosides, a renewable resource made from coconut oil and corn syrup. These starting materials provide biodegradable, mild surfactants that can function in extreme conditions for a variety of consumer and industrial applications. Because of their safety, Suga®Fax products are excellent in consumer and industrial products, dramatically lowering the risk to human exposure.

Suga®Fax surfactants are recommended wherever wetting, hydrotroping, and detergency are needed in a consumer or industrial product.

Learn more →

Suga®Nate 100NC

Naturally-Derived High-Foaming Surfactant

Suga®Nate 100NC is a high foaming sulfonated surfactant based on a naturally derived alkyl polyglucoside derivative. Suga®Nate 100NC offers good emulsification, mildness to the skin, and excellent lime soap dispersion to give the formulator maximum flexibility in the preparation of light and heavy-duty cleaners. Suga®Nate 100NC can be used in dishwashing liquids that feature outstanding grease emulsification, mildness to the hands, and excellent foam stability. Suga®Nate 100NC exhibits superior cleaning in very hard water, reducing the need for expensive builder in the formulation. It is also suitable for use in acidic formulations such as those containing glycolic or α-hydroxy acids. The stability of Suga®Nate 100NC at any pH makes it desirable in many formulations for industrial, institutional and household applications.

Learn more →

Suga®Nate 160 Dry

100% Biobased Sulfate-free Surfactant in Anhydrous Form

Suga®Nate 160 Dry is a sulfate-free primary surfactant in anhydrous form. Using Suga®Nate 160 Dry, formulators can begin with a high-foaming product and build to preferred aesthetic properties without concerns of irritation to eyes and skin. Suga®Nate 160 Dry is also very low in toxicity and is 100% natural carbon biobased, derived from natural materials.

Learn more →

Suga®Nate 160NC

Sodium Laurylglucosides Hydroxypropylsulfonate - 100% Natural Carbon

Suga®Nate 160NC is a naturally-derived, high-performance surfactant suitable for a variety of personal care formulations. Using Suga®Nate 160NC, formulators can develop a high-foaming product with discriminating attributes without irritation to eyes and skin. Suga®Nate 160NC is very high in natural character, very low in toxicity and cost-eff ective when compared to other surfactants in typical sulfate-free formulations.

Suga®Nate 160NC meets the requirements for ingredients that may be included in goods and services bearing Nordic Swan ecolabelling.

The Safer Choice Program of the U.S. Environmental Protection Agency certified Suga®Nate 160NC as Acceptable for use in Safer Choice-certified products and for listing on CleanGredients as a surfactant.

Suga®Nate 160NC also meets criteria for direct release under EPA’s Safer Choice Standard and the use limit for this ingredient no longer applies.

  • Direct release products are approved in outdoor applications that are likely to bypass sewage treatment . Products include home car washes, cleaners for use in power washers, boat cleaners, drilling muds, graffiti removers, fleet disinfectants, window cleaners, and the like.

Readily biodegradable per OECD 301 methods.  This product meets the criteria for a surfactant under the EU Detergents Regulation (EC) 648/2004.

NGO Certifications

  • Conforms to NSF/ANSI 305-2012
  • DfE Approved (CleanGredients)
  • USDA Biopreferred Product
  • Whole Foods Market® Premium Body Care™ ingredient

Suga®Nate 160NC is stable in hydrogen peroxide.

Learn more →

Suga®Nate 160NC MB

Sodium Laurylglucosides Hydroxypropylsulfonate - 100% Natural Carbon | Mass Balance RSPO

Suga®Nate 160NC MB is a naturally-derived, high-performance surfactant suitable for a variety of personal care formulations. Using Suga®Nate 160NC MB, formulators can develop a high-foaming product with discriminating attributes without irritation to eyes and skin. Suga®Nate 160NC MB is very high in natural character, very low in toxicity and cost-effective when compared to other surfactants in typical sulfate-free formulations.

Suga®Nate 160NC MB meets the requirements for ingredients that may be included in goods and services bearing Nordic Swan ecolabelling.

The Safer Choice Program of the U.S. Environmental Protection Agency certified Suga®Nate 160NC MB as Acceptable for use in Safer Choice-certified products and for listing on CleanGredients as a surfactant.

Suga®Nate 160NC MB also meets criteria for direct release under EPA’s Safer Choice Standard and the use limit for this ingredient no longer applies.

  • Direct release products are approved in outdoor applications that are likely to bypass sewage treatment . Products include home car washes, cleaners for use in power washers, boat cleaners, drilling muds, graffiti removers, fleet disinfectants, window cleaners, and the like.

Readily biodegradable per OECD 301 methods.  This product meets the criteria for a surfactant under the EU Detergents Regulation (EC) 648/2004.

NGO Certifications

  • Conforms to NSF/ANSI 305-2012
  • DfE Approved (CleanGredients)
  • USDA Biopreferred Product
  • Whole Foods Market® Premium Body Care™ ingredient

Suga®Nate 160NC MB is stable in hydrogen peroxide.

MASS BALANCE RSPO
In keeping with Colonial Chemical’s commitment to sustainable raw material sourcing, this product is derived from palm oil that contributes to the production of certified sustainable palm oil. More information on www.RSPO.org.

Learn more →